poe

New member introduction here. Currently have a ring doorbell and cheaper amazon motion camera setup that has been sufficient over the last few years until someone recently ran my mailbox over. I am now in the market for a better system but am very limited by cost. I'm aware "you get what you...

Dear all, I have an hikvision nvr Ds-7604ni-se/p which supports Poe (af) and wanted to add a camera hwp-n4225ih-de(b) which requires poe+ (at) I think that my nvr won't be able as per descriptions to use the camera. Is there anything I can to? I was wondering to use an external poe+ power...

Hi there I have some POE cams linked to a POE NVR. My issue : I can't get to the cams configuration page if I am not also linked to the POE switch. Is there any way to configure the cam or the NVR to solve this issue? Thanks! Quentin

I have nvr5216-16p-i /l and 9 poe camera berween 6mp and 8mp which poe cable i should use to connect the cameras to nvr. Max distance of cable is 40m for Indoor use only.

I have a nvr that I need to get internet to that is 520ft away with an underground cat 5e cable. I purchased a POE extender but it did not work. I do not have the ability to plug something in, halfway in the field. I was told I need and EPOE injector but I can not find one. I need to go...

Hi I’m looking for an IP (POE) camera (ideally in black) to go on the gable roof end of our house which would place it about 20ft up from the ground ? Everything I’ve looked at so far seems to need to be placed around 8 to 10ft high due to its wide angle view. Has anyone got any...

This isn't a BI question per se, but that's what I use for all three of my cams (power use lol) — hopefully soon to be four — and couldn't think of anywhere else to ask this. So — I have a hardware/power issue. The short of it is: Two of the three cameras (and if possible, three or four of...

I have a BNIB; Ubiquiti US-24-250W UniFi 24 Port 250W PoE Managed Gigabit Network Switch BNIB Located in South Wales ideally cash on collection or alternatively have this listed on ebay https://www.ebay.co.uk/itm/353478389455

I have two UK Spec BNIB and Sealed for sale; HIKVISION DS-2CD2T87G2-L 4MM 8MP AcuSense ColorVu 4K Cameras For Sale. I am located in South Wales UK, so ideal can do a cash on collection or alternatively I have these also listed on Ebay https://www.ebay.co.uk/itm/353479218080

Hey, So I have this friend, he really likes his Wyze cameras, mainly because they're cheap, easy to stick up + move, and he really likes the software's features Problem is, he's got like 50 of them on his Wifi, and they're starting to cause issues with some of his portable credit card machines...

I have a Lorex LNZ32P4B POE IP camera (PTZ dome camera) that is connected to a Blue Iris system (2 total cameras). The Lorex cameras I have include a microphone input connection that is a pigtail from the ethernet cable. I asked the Lorex chat representative for what type of microphone I...

Hello all, I have posted here before about my car wash and the desire to get it on camera. After being vandalized several times recently, I am unable to put this off any longer. Its pretty simple (well not so much for me), I have saved $5K and willing to invest it into a surveillance system. I...

Hello, I have most on my cameras connected to 192.x.x.0 subnet, and 6 of them connected to NVR's internal PoE switch on 10.x.x.0. I want to change their adresses to ones from 192.x.x.0. Should I change switch adress in NETWORK>SWITCH, and then change camera adresses from CAMERA>REMOTE DEVICE, or...

Solved: Had the RJ45 connectors on the camera end of the Cat 6 run upside down, and bad RJ45 connector on the network side of the run on one cam. So I'm a little stumped. I get my cameras, I plug each one at a time into my PoE switch to make sure they worked and to adjust all the settings, IP...

Hello, Basically I need to create my own application streaming video from a PoE IP Camera, the camera I have only uses .dvr files, are there any PoE IP cameras that use .mp4 files?

Hi All - New to the group. Here is my dilemma. For the past decade, I have had a Canon VB-C50i power-over-ethernet camera mounted outdoors in a dome. It has been a fantastic camera because of its 26x optical zoom. It is mounted on my roof and points out to a surf spot that allows me to zoom...

Hello everyone: I have a rather dated system It's samsung POE, uses ethernet wires for each camera. I have 5/8 connected. My 1T hard drive apparently ran out of space. I did get it to format but it now says "no hdd installed." I have actually got it to recognize the seagate hard drive since...

I'm about to order some network goodies from Graybar, and I need more network cable. I have a box of 5E that will do gigabit but I wanted all new purchases to be Cat-6 or better. So, is there a certain brand or certain model of UTP Cat-6 cable that you prefer? Yes I will run POE: access points...

Has anyone used this POE tester: PoE Tester Gen 2 If connected between a PSE (a POE switch) and a PD (an IP cam) it shows the Amps, Watts and Volts that the PD draws. I am eyeing it since i've been in a situation where the PSU for the switch had enough Volts but not enough Amps for a (PTZ)...

i have NVR connected from POE, the POE is connected to HikVision 4 MP IR Fixed Mini Dome IP Camera DS-2CD2545FWD-IS F2.8, my problem is i am not getting sound from the TV connected to NVR through an HDMI code

... for under $200US. After a couple of years of looking/waiting for a DB cam I'm seriously on the verge of giving up. We had an extension put on to the back of the house and I pre-wired Cat6 for security cams and even ran a line specifically for a DB cam. Granted, I didn't do the due...

So I’ve been looking for a while now and while I have seen a few options, most seem overly expensive for low quality or suboptimal specs. What I want: - 8mp - In-wall and flush-mounted - POE - 90 minimum viewing angle - Adjustable viewing angle - IRCut filter - Integrated IR LEDs -...

I have a new 59225U-HNI, Mikrotik POE switch CRS112-8P-4S-IN (it supports both 802.3af and 802.3at). I also have the 48V power adapter needed for af/at POE. The camera is 45m away (~148ft) with the same amount of cable - Lanmark (by Nexans) Cat6 AWG24 F1/UTP, with cat6 shielded connectors...

Hello, I’ve done a lot of reading online on the ubnt website and other websites as well and I can’t seem to find the answer that I’m looking for so I’m really hoping you guys can help me out! My question is how many Nanostation's would I need to link up 3 cameras, from about 120 feet away from...

Hi All, New visitor to IPCT! I'm planning to install a few IP/PoE cams at my home. I'm planning to connect all the cams in their own VLAN so that I can filter out-bound internet traffic from the cameras (based on my preliminary knowledge). My understanding is that this can be achieved by a...

Hi, I think this is a new doorbell from YooSee (model SD-M5) and on paper it looks too good to be true: 1080p app controlled smart doorbell camera PoE wireless Wi-Fi AC 8-24V DC 9-36V built-in PIR motion sensor Yoosee app Yoosee 1080p smart video doorbell/intercom HD camera wireless/Wi-Fi...

Hi, I just received a new camera; this is my first install ever. I'm able to turn on and activate the camera via the DC adapter but am unable to turn it on through PoE. I think I have an idea why it is not turning on but want to confirm that it is not an issue with the PoE hardware on the...

Hi folks, So I've just installed a large setup all Hikvision, mainly using DS-2CD2125FWD-I cameras. All powered from PoE either from the back of the NVR (DS-7732NI-K4/16P) or via a separate PoE switch to add more than 16 cameras to the setup. All worked great for a week, then one went off...

Hi all, I'm having a right time with a new Hikvision DS-7732NI-K4/16P NVR and I'm struggling to solve this one in a way I like. User has 20 cameras, all POE Hikvision which I've installed. Plug each one-by-one into the 16 port POE switch on back of the NVR, so it does it's auto setup...

For over a year now a neighbor of mine has had 2 cameras pointed at my home. She knows when I come home and when I leave. Yes she even use to be able to see inside my home until I had a curtain put into place. Now with things getting worse with my living situation and my sister and her kids...