poe

Hi, I'd like to get at least one camera put up at the back of my house, where I have been broken into a number of years back and had another attempted break in this week. Ideally, I had something like the following in mind; Preferably PoE (the router sits on the other side of the wall where...

I'm looking to get the Amcrest 1080P Outdoor PTZ POE IP Camera Pan Tilt Zoom (Model IP2M-853EW) and connect it to my Lorex POE DVR. Does anyone know if doing this would work? What should I be on the lookout for? The camera appears to have POE and audio video cameras. My exissting cameras...

Hi guys, I went thru the LaView website and I can't seem to find any decently priced cameras (budget is ~$250) there to be able to have a PoE powered IP cam on my porch that can also act as a "door cam" / video doorbell (ala... Ring/Nest/Blink etc... where the device notifies you someone is at...

Hi all, I have attached my network diagram I experience a problem whenever there's a power outage on my network. When the power is restored, the IP Cameras (34 of them) cannot get IPs from the Router/DHCP Server (and end up on APIPA) until I reboot the Hikvision POE Switches once more and...

1) I was wondering how you would protect the following setup against lightning: The following devices are going to be connected to the PoE switch: - one indoor camera - two outdoor cameras (obviously more susceptible than the indoor camera) - three PCs The PoE switch is going to be connected...

I am not techno challenged, and I desperately need to upgrade my surveillance system. I don't want to break the bank but I don't want junk either. I have been reading too much and over researching, please help

I am starting my hardware shopping list and had a question. So far, I have two IPC-HDW5231P-Z cams. In reading in on of the threads, it takes up 5W with IR. Question: Is 5W typical for Dahua cams ? While, at the moment I don't know exactly how many cams for outdoor I will end up but it as I am...

Hi guys, as IP seems the standard to go and POE becomes a neat way to power the devices up, I wonder what POE switch for a home scenario you can recommend? Requirements: 4+ POE ports (at least 802.3af support?) - better 8 What standards should be supported? Are 15W output per port enough...

So there's this massive thread here - Super-cheap POE IP Camera? - that talked ad nauseam about junky stuff that may or may not include extra bonus malware for your enjoyment but I'd love to see a discussion on what sort of semi-cheap and semi-good options are out there for really small POE...

Hi there, I am currently looking into VTO3211D-P2 as the IP intercom for a two unit home. (Note: Newer generation: Recommended Replacement: VTO3211D-P-S2/P2-S2/P4-S2 but on the first look not much different really) It is a compact intercom / door station for two units - runing over IP (or to...

Hey there - This isn't at all related to BI or my security camera system. I'm not planning on adding any wifi cameras. Currently I'm using this TP-Link RE210 wifi range extender in my house which has worked alright, but I'm wondering if I can't do better now that I have the ability to run my...

Hello, I have poked around the forums a bit and it seems there are a lot of knowledgeable people here. Most of the recommendations seem to be for outdoor camera's though, I am looking for something indoor that is hopefully fairly compact. I want to setup my condo with indoor network camera's...

I am looking for outdoor, poe, preferably wdr, ip cameras for a farm. I also would prefer the cameras support local recording via SD cards to eliminate a need for a DVR. The less moving parts in the system the easier it will be for me to support. I have deployed two systems using Samsung...

Hi everybody! I'm looking for a quality 8 or 16 Channel PoE NVR w/MJPEG Streaming. I need to be able to stream to the iOS Safari browser with a simple HTTP URL - it CANNOT require a plug-in. A decent mobile app for watching recordings would be a nice bonus. I wouldn't mind a recommendation...

Hey, I’m considering getting one SD49225T-HN (which requires poe+) and 3 turrets (running on standard poe). The plan is to use these with a non-Poe nvr and therefore trying to figure out options on How to accomplish this. I plan to use these cameras in my summer house which is basically shut...

Hi all, Earlier this year I got some cheap CCTV kit from Aliexpress for my summer house. The cameras are good (picture quality), recording when I want it to and i´m getting emails with snapshots everytime movement is detected etc etc. So far so good! This is what I have (link): Onvif 1080P 8CH...

Hi all, Already spent spent a lot of time here earlier this year before getting my first cctv stuff for our summer house. Sadly, I didn’t spend enough time here as I purchased something that I’m, 8 months down the road is not particularly happy with :) This is what I got: Onvif 1080P 8CH HD...

Has anyone seen one of the new iDS-9632NXI-I8/16S Deep in Mind (aka deep learning) NVRs in the wild? Seems like an interesting concept (motion detection without false alarms, facial recognition, etc). Sort of weak that it only supports these functions on 16 of 32 channels. Still, looks...

£300 limit So was going to buy an Annke POE 4CH set... but after searching the forums Annke is one to avoid?... Now I do have "Server" I could use.... I have Dell T20 unused in its box, no idea how to set it up.. can anyone recommend anywhere? preferable on Amazon, I'd buy from anywhere...

Hi there, I would like to install surveillance cameras in my house but running wires nicely is a problem and I want to avoid wifi. Wondering if this setup would work: Poe hub/dvr connected to three cameras via cat 6 cable (these are the areas I could easily wire to) Powerline adapter...

Need suggestions how to: I have a dozen DS-2CD2532F-IWS, Chinese labeled V5.3.0_150513, Manufactured 12/2015, all come with an XINFLY POE Injector. They bought from China July 2016 already hacked to EN. To be installed all over a Large Site with existing Ethernet and WIFI. Most locations not...

Hi, I have 3 new NVR from Dahua, with 8 and 16 channel POE ports. My client already have 34 Zxtech camera's and i only replace the NVR. Can i use the POE port as well for other than dahua cams ? I set them for test on DHCP but i get no image from the Camera. Can somebody inform me about how...

I have been given a roll of cat 6a network cable, I want to add two hikvsion dome cameras to my cctv network running poe if I purchase a Poe switch ( eg Netgear or ubiquity)will this work using the cat 6a cables. Thanks in advance

$90.00 Brand New. Opened to test and photograph. US Retail version! Ships FREE upon confirmed payment! Buyer responsible for proper set up and installation. Any questions? Please ask. Thanks for looking!

Hi, Does anyone know of any outdoor POE cameras with built-in PIR triggering? I would like to use them with my Blue Iris setup (similar to how the DS-2CD2432F-IW PIR integrates with Blue Iris but outdoor). I currently have 6 DS-2CD2332-I cameras deployed outdoor, but I get so many false...

Hello, newbie looking for assistance. Cannot find much on the net I have a separate external POE (Tenda) smart switch. with IP 192.168.1.19. My network is on the 192.168.1.x range. My NVR with built in ports is on 192.168.1.108 range. How do I access the cameras with the Dahua config tool on...

Ok installed a POE camera system. Honeywell brand and it had a RCAjack in and out so I installed a external mic and it didn't work. Honeywell said the RCA jacks there are no longer used. So, scratching my head and rather thenswitch the camera to a POE camera with built in MIC can the pins not...

As I mentioned in the New Member section, I'm new to the IP Cam technology and looking to add some quality cameras for home security. Based on the what I've read over the past couple days on the IPCAMTALK forums, I've narrowed down the camera technology to the Dahua IPC - HDW5231R-Z Turret cam...

I have purchased 6 piece HAC-HFW2221R-Z-IRE6, and will use Cat5 wire to connect. Therefore I have purchased the following video balun. Cameras came without power supply, which I think is standard. I know they are are 12v but I can't find anywhere how many Amp the power supply should be...

I'm a newb looking to learn about ipcams. I was looking to add some security cameras to my residence, and made the mistake of installing EZVIZ Wifi Cameras outside. I figured since I was using the new Google Mesh Wifi, it would be sufficiently strong for maintaining a connection to the cameras...