Search results

Ohh thanks for that. Pretty interesting. Now you got me thinking I should have 2-way audio deterrents. That audio is quite loud. I wonder if it is from the camera. Would you be able to point me to the source of that clip ?

In your case I think it would annoy the drivers as your cams are set very close to the road. Worst case scenario, it may dazzle a driver causing an accident. No one needs that. That said it'd be neat to have some video of how effective the LEDs are. In my case the cams would be aimed between...

@TheWaterbug Do you have any control over the active deterrents? I am seriously considering the same cameras in black, but I am hoping I'll have some way to turn on the active deterrent with either Home Assistant or Blue Iris. Maybe an HTTP PUT or POST string might work on this. edit: I...

This sounds like the same problem I bumped into. In the 2021.02.01 version of Deepstack they have dropped support for older GPUs. To verify, go to the AI Tool Deepstack tab and hit the stderr.txt button and scroll through the log.

I am hoping one of you gurus can help shed some light on this. As the title suggests my camera will take a snapshot using the following string: http://192.168.1.226:80/SnapShot_Ch0.jpg But subsequent snapshots have the same image and time stamp. This is an older 720p IP cam of the generic...

It is rumored that a rooted phone would be able to display whatever apps the user wishes on Android Auto. Has anyone successfully run the BI Android app or the BI iPhone app on either car play or Android Auto ?

Just wondering if anyone is happy with their night vision image or if all of these cams have the same spots on the image. I have taken it apart to clean it but it did not seem to help. This is a shame because the daytime image is great.

Here is my approach. Note that I had the Elk in the circuit IN SERIES prior to the adding the camera. This was just fine because the only loop current was for the backlight on the doorbell button. Only when the button is pressed would the full current of the doorbell chime coil be present on...

I was looking through older posts in this thread and did not really see a good answer to this so I thought I'd chime in here. This is what I am using and it works very well. I use this connected to a spare wired zone on my DSC panel and programmed the zone as a 24H Non-alarm zone (for home...

Greetings. Are you running Uniden build 171225 and can you confirm if you have the "subscriber not available" message before your update. I am on 171225 and do not have the message. I have avoided upgrading to 180726 because of this post where @Mconigs78 claims the message is present after the...

Running a Uniden version V1.4.62 Build 171225 . This appears to be an older firmware than the 180726 that you updated to, but I do not get the "subscriber unavailable" message. The Onvif capability would be nice to have, but I am hesitant to update if this firmware causes the "subscriber"...

Please forgive if this was asked (40 pages deep) but regarding your glare, did you remove the protective plastic disc that covers the black plastic IR area ? I noticed the disc and thought about leaving it on but did end up removing it.

Any updates ? I just noticed this thread and would like to know if you found a fix. It sounded to me like a power supply issue. If the power supply was marginal the extra current required for the positioning might brown out the processor.

Thanks for all the ideas. This is great food for thought. A home automation PC needs access to the BI system & cameras. Probably easier if all of the HA devices get moved into the VLAN. Any ideas how could I VPN into a VLAN segment if the VPN server lives on the main network ?

Some of the cheap Chinese cams I have are trying to call home but can't because I have the gateway set at the cameras IP address. I have used some sniffing software (Wireshark) to prove this behavior and it is something to be concerned about. The cameras also have ports open (Telnet Port 23)...

Greetings, I am looking to segment my cameras on to their own VLAN. I have avoided this to date because Blue Iris is running on my main PC. I have a few managed POE switches for my cameras that will allow me to set up VLAN. So a few question come to mind: Do I need to multihome my PC so that...

The Amcrest turret cams that I recently installed are powder coated cast aluminum so no issues with corrosion on those. As mentioned the plastic body cams also fare prettty well. I never use the supplied mounting hardware. A small box of #8x3/4 or 1" Stainless steel screws is good insurance for...

Ditto, but a bit of surgery to decouple the mic from the body of the cam might help.

On my PTZ cam when I pan, tilt, zoom & focus, the motor noise is carried on the audio channel. I don't see any option in BI to mute the audio during the PTZ movements. Have I missed something in the camera configuration ? Unfortunately there is no option in the firmware on either of my PTZ cams.

If what you've read so far does not sway you, most of the cams available on ALI or eBay are not going to be UL or ULC approved. Judging by the the teardowns that I've seen on similar devices and the poor build quality of some of the discounted offshore stuff, I would not risk burning down my...

Just noticed your message again. You can send Pushovers via email. Log into your account at the Pushover site and have a look below your User Key, there is a key that you use to send pushes via email. I would create a single purpose Gmail account for this purpose. I just wish Pushbullet had the...

It would be very nice to have a plug-in that would send pushes of our own choosing. Pushbullet comes to mind as it can send video clips, snapshots or files. I would like a snapshot of the motion detected by BI so that I can decide if loading up the VPN and logging into the BI server is needed...

Greetings, I would love to see a tutorial on getting the most out of the log files and status pages. The numbers attached to events are not really self evident. Also maybe an explanation of how notifications work as they are not intuitive. I have seen local login followed by another local...

By chance are you running BI as a service? If so there should not be a tray icon except when you re-run BI as a local console mode on top of the service. If your machine had a restart as Windows has become infamous for when it updates, both the local console and service would close but the...

No way to add "= Solved" to the threads title with an advanced edit ? Edit: Solved Turns out the file was exported properly but VLC had trouble playing it. Windows Media Player managed to play the MP4 just fine. Will need to investigate this a bit more to find out why VLC could not play the...

I hope this is not considered a hijack but I am also looking for suggestions on POE switches. I have a few specific requirements: Small footprint as it will live in a structured wiring box 8 port Stackable so I can add another 8 port on top when needed Fanless as it will be enclosed Managed...

I don't know the specifics of your camera but if the camera is a recent IP cam it may be Onvif compliant. Assuming it is visible on your LAN, you should be able to use the Onvif Device Manager to set up the network and possibly a few other settings. Try the Tinycam free Android app. If it can...

Thanks for the reply. All in all it is not a bad thing because it does "lite up the event". But are you suggesting the cameras are defective, or is this a normal response to a small number of pixels changing? I know my cameras are crap, however I never saw this in iSpy. What mechanism does...

Searching for this turned up nothing so I will ask here. During playback in from the timeline in Blue Iris at speed >>, it shows the image gets brighter as the cams go into alert, then after the event they dim down. I've noticed this on both day and night recording on a few different brands of...

Vorlon has a good point, I know I own a couple really cheap cams that just don't want to connect sometimes. You can ping them all day long and they respond perfectly but won't show up in the Onvif Device Manager until after a power cycle. So a couple troubleshooting tools to have are the above...