firmware

Hello there, First question on this forum. And a rookie one as well :) I have a couple of the IPC-HDW5541H-AS-PV cameras in a installation with a Dahua NVR. I have noticed that theAI on one of the cameras is sketchy compared to the others (a.o. it thinks a shadow from a fence is a motor...

Hi everyone. I need the firmware for the EPCOM XB11SP 1 Mpx IP camera, will someone have it?

I noticed there’s a newer firmware, V4.20.002 build 210705, for the Hikvision PoC DVRs. Prior to this the most recent firmware was V4.20.001 build 190430. The firmware is not available on the portal sites yet but is instead on the global Hikvision site, just listed under the product...

Hi, New to the forum, just installing my CCTV (with Blue Iris) :). I got the above camera. It's a 5 MP PTZ, from ctronics. For some reason I was not able to disable to IR led's. I contacted ctronics about this, they very fast and helpful but disabled the led's all together (which was not my...

Hi, I was out of my mind for upgrading my US version of DS-7608NI-I2 NVR V4.50.000_210125 to Global V4.51.005_210628 but in the end I got what I was looking for. Finally I have option to do continuous recording as well as event recording at the same time and could see on timeline in web-version...

Hello, Recently got myself a Dahua / IMOU camera, and since I got so much fine information from here I figured i'd give some back. model: IPC-G42P-IMOU fw : Eng_P_V2.680.0000000.24.R.20210309 So here's how you can get into a busybox shell on these. # Step 1 Attach to serial hardware, thanks...

Wanted to post this for anyone that wanted to switch to Hikvision firmware. ---CHANGING FIRMWARE WILL NOT ADD NEW FEATRUES.. these are coded separately from the firmware. If you don't already have smart events it will not add them.--- It may fix or enhance existing functions or even stability...

Hi all, I have following setup: Outside: VTO2000A - firmware V4.300 (new one with SIP) Inside: VTH1560BW - firmware V4.300 (new one with SIP) Wired with CAT6 and CAT5 cable. After firmware upgrade I performed factory reset on both. Both see each other in terms of configuration, no apparent...

Does anyone know where I can find firmware updates for the following product: IPCT-NITECOLOR-DM2 When I go into the web interface for the camera I can see the following model number: HNC344-XD/LU When I go to HikVision's website, there is not mechanism by which I can narrow the firmware down...

Hi guys.... Sometimes you will find yourself having to choose between different things in life. That can be a challenge but even harder if you don't know what each option means. Would you like to have "lkjh" or a "kjhlkjuy" ??! Today I was just looking for a new firmware for my...

Hi there! I post this information here in case someone else is experiencing the same problem. Who knows, with a little bit of luck maybe someone can suggest a solution. I prefer to set encoding for both the main strean AND the substream to H.265 and and I want to have the Iframe interval set to...

Hi, In the absolute remotest chance that someone may have the corresponding .pkg software, I'm posting this here - I'm looking for V19.1.13 (any version) of the IPCAM shown in the attachment The original firmware was V19.1.13.16.65-20201014 The seller sent me V19.1.11.16.3-20201222 which isn't...

I believe I have this Brovotech camera. It's difficult to tell because I bought the camera from Amazon from the seller, EZVIS in 2016. They no longer sell the product. The manual gives the name, "insee". I can't find that company anywhere. The camera web page lists this info: You'll notice...

Having an issue upgrading my friend's HFW2831T-ZS, he bought 3 from Andy's Amazon store for his restaurant The reason I started asking about firmware updates is because my friend's HFW2831T-ZS have always acted funny. We have trouble connecting to camera recordings via DMSS app. Related...

hi after update firmware damage language Dahua NVR How to fix problem ??? NVR Model : DHI-NVR4232 firmware use : DH_NVR4xxx_Eng_P_V3.202.0000.1.R.20170221.bin my NVR in original language ? europe - English language my NVR in original language ? Chinese (PLEASE HELP ME)

Hi Guys, I bought a hikvision DS-7608NI-I2/8P but didn't inherit the password. I thought I could flash the firmware with existing and start afresh, but I am getting an which others have posted about and I can't seem to find a solution either: Error: Open File[C:\tftp\econt_Vision-Av2000]...

Hi, install the latest firmware to Hikvision NVR DS-7716ni-i4/16p (NVR_K51_BL_ML_STD_V4.40.015_200616) this worked without problems for 2 days, on the third day Nvr disappeared from the map, I have tried TFTP (ip-192.0.0.128 etc... without any result, my nvr was on firmware 3.4.92 before...

Latest Firmware for G3 Family DS-2CD2XX6G2, 5.5.150 BUILD 200927

Bought a second hand DS-7216HGHI-SH. Was told that just power adapter is missing. I have added regular 12V DC socket in parallel, so I can use standard 12V connector. In process I have noticed that all four 470u/10V caps were swollen, so replaced all caps just in case. On board battery CR-1220...

Can someone please link me to the latest firmware for IPC-HDW2231RP-ZS ? I've searched the forums, google searched the forum, and I went to the sticky post @fenderman created and can't find it. Looking for an @EMPIRETECANDY post but the only one I could find similar was for a different model...

Hello, I can't get the config for e-mail working for this camera, I have tried both Gmail and Yahoo according to the Dahua Wiki but no success I have read on the web that it might be a problem related to the companies strengthening their security and it might be solved with a FW update? The...

Hi guys, My cam has SD card. Anyone knows how to flash fw using SD card from uBoot? I guess it should/could work around “fatload mmc ...”. Just asking if someone does have an experience in this area to ease my work. Thank you, N.

I have a 5231 turret cam, and I see that it is set to PAL and I want to change it to NTSC. Can you help me change this? Thanks, R

The procedure for Dahua firmware upgrades really sucks. Jumping through the hoops..... 1) locate the firmware and DL; 2) Log into cam GUI; 3) save config; 4) reboot cam; 5) install new firmware; 6) factory reset; 7) find your cam on a subnet you are not normally using; 8) update settings...

One of the locations I maintain has a DH-NVR4208-08P running firmware 3.200.0000.8.R from 04-28-2015 and I'm trying to find the latest/last firmware that was released for that model. I can't seem to find a page on the Dahua Wiki pages that lists a firmware for the DH-NVR4208-08P. All I can find...

Hello guys, I'm new here so hi to you all (sorry for my bad english writing skills :rolleyes::rolleyes:) I would like to upgrade the firmware of my NVR to the new interface of Dahua. Its a Dahua DHI-NVR5216-16P-4KS2E (copy/paste of current web app) The current firmware is 3.216.0000000.0...

I've got what could be a rather large issue I recently discovered where not only do I not have Admin access to some of my Hikvision cams but I also have Chinese made cams. Huzzah! /sarcasm I stream them to various devices via Blue Iris software so admin access wasn't necessary until I...

Hi guys, I bought a Suneyes IP camera kit (NVR+4 CAMERAS) 3 years ago but I'm struggling to find firmware for NVR and Cameras because of the Suneyes webite is not available anymore. Do you know if there is web site where can I find the files and manual ? Thanks for your support

While I was updating the firmware for the VTO2000& and VTH1550CH to the 4.3 SIP firmware, I also did the MCU updates. All went fine except a stupid mistake from my side: per accident I selected the VTH MCU firmware and installed it on the VTO via the VDP config tool :( That update said...

Good day all, Last week I went ahead and tried to perform a firmware update on my Swann NVR (SWNVR-87285H). The firmware failed to update and the system hung. After an hour, it rebooted and halts on the loading page. Oh dear. I've contacted support a number of times, and they've been no help...