Dahua NVR Web Interface text not showing properly after upgrade

Joined
Oct 31, 2022
Messages
5
Reaction score
1
Location
Malaysia
Dear all,

I manually upgraded my NVR to the latest firmware on Dahua's website. The last time I upgraded the firmware was in 2019. Subsequent attempts and clicking don't he button didn't reveal any new firmware. Hence, after I found a new version on the website today, I did a manual upgrade.

My issue is the text on the WebInterface looks wrong (see image below). It is like the language file was not available, or pointed to the wrong file.

Any help on how to proceed will help. Many thanks.

Warm regards,
CT

NVR: Dahua DHI-NVR5232-4KS2
OLD firmware: 2019 firmware
New firmware: DH_NVR5XXX-4KS2_MultiLang_V4.002.0000000.5.R.220729

WebInterface with rather strange wordings.
Screenshot 2022-10-31 130558.png

This is the System Config > Language.
Screenshot 2022-10-31 130617.png
 

paul@austins.tv

Getting comfortable
Joined
Dec 4, 2015
Messages
286
Reaction score
267
Use Internet Explorer and see what it looks like. You will ideally need to accept the web plugins.
 

Timokreon

Getting comfortable
Joined
Feb 25, 2022
Messages
595
Reaction score
1,065
Location
Chicago
Perhaps trying to reinstall the firmware? Or try a factory reset?
 
Joined
Oct 31, 2022
Messages
5
Reaction score
1
Location
Malaysia
Perhaps trying to reinstall the firmware? Or try a factory reset?
I've tried to reinstall the firmware, DH_NVR5XXX-4KS2_MultiLang_V4.002.0000000.5.R.220729, but no difference. I've used both the webinterface and configtool to upgrade the firmware, but no luck.

I've yet to do a factory reset. hhm.. not sure if that's going to help
 
Top