This sounds like the same problem I bumped into. In the 2021.02.01 version of Deepstack they have dropped support for older GPUs. To verify, go to the AI Tool Deepstack tab and hit the stderr.txt button and scroll through the log.
I am hoping one of you gurus can help shed some light on this.
As the title suggests my camera will take a snapshot using the following string:
But subsequent snapshots have the same image and time stamp.
This is an older 720p IP cam of the generic...
It is rumored that a rooted phone would be able to display whatever apps the user wishes on Android Auto. Has anyone successfully run the BI Android app or the BI iPhone app on either car play or Android Auto ?
Just wondering if anyone is happy with their night vision image or if all of these cams have the same spots on the image. I have taken it apart to clean it but it did not seem to help.
This is a shame because the daytime image is great.
Here is my approach. Note that I had the Elk in the circuit IN SERIES prior to the adding the camera. This was just fine because the only loop current was for the backlight on the doorbell button. Only when the button is pressed would the full current of the doorbell chime coil be present on...
I was looking through older posts in this thread and did not really see a good answer to this so I thought I'd chime in here.
This is what I am using and it works very well. I use this connected to a spare wired zone on my DSC panel and programmed the zone as a 24H Non-alarm zone (for home...
Greetings. Are you running Uniden build 171225 and can you confirm if you have the "subscriber not available" message before your update. I am on 171225 and do not have the message. I have avoided upgrading to 180726 because of this post where @Mconigs78 claims the message is present after the...
Running a Uniden version V1.4.62 Build 171225 . This appears to be an older firmware than the 180726 that you updated to, but I do not get the "subscriber unavailable" message.
The Onvif capability would be nice to have, but I am hesitant to update if this firmware causes the "subscriber"...
Please forgive if this was asked (40 pages deep) but regarding your glare, did you remove the protective plastic disc that covers the black plastic IR area ?
I noticed the disc and thought about leaving it on but did end up removing it.
Any updates ?
I just noticed this thread and would like to know if you found a fix. It sounded to me like a power supply issue. If the power supply was marginal the extra current required for the positioning might brown out the processor.
Thanks for all the ideas. This is great food for thought.
A home automation PC needs access to the BI system & cameras. Probably easier if all of the HA devices get moved into the VLAN.
Any ideas how could I VPN into a VLAN segment if the VPN server lives on the main network ?
Some of the cheap Chinese cams I have are trying to call home but can't because I have the gateway set at the cameras IP address. I have used some sniffing software (Wireshark) to prove this behavior and it is something to be concerned about. The cameras also have ports open (Telnet Port 23)...
Greetings, I am looking to segment my cameras on to their own VLAN. I have avoided this to date because Blue Iris is running on my main PC.
I have a few managed POE switches for my cameras that will allow me to set up VLAN.
So a few question come to mind:
Do I need to multihome my PC so that...
The Amcrest turret cams that I recently installed are powder coated cast aluminum so no issues with corrosion on those. As mentioned the plastic body cams also fare prettty well. I never use the supplied mounting hardware. A small box of #8x3/4 or 1" Stainless steel screws is good insurance for...