SMD 3.0 dahua

EMPIRETECANDY

IPCT Vendor
Joined
Nov 8, 2016
Messages
8,259
Reaction score
23,719
Location
HONGKONG
Andy,

What is S2? Also I just received my SD5A425XA-HNR and started bench testing today. So far looks all good, I can not wait till I install it.
S2 version uses SMD 3.0, hardware are totally same as the S1, so when your S1 camera update to SMD 3.0, it will be S2. :D
So that is why buy a updateable camera is important.
 

wittaj

IPCT Contributor
Joined
Apr 28, 2019
Messages
24,438
Reaction score
47,563
Location
USA
Does this only impact SMD or also human AI within IVS rules?
 

wittaj

IPCT Contributor
Joined
Apr 28, 2019
Messages
24,438
Reaction score
47,563
Location
USA
I know that many feel the SMD needs some work, but I'm not sure how much they could improve the AI within the IVS functions.

From my own personal experience - the true test....I have found the AI of the Dahua cameras to work even in a freakin blizzard....imagine how much the CPU would be maxing out sending all the snow pictures for analysis to Deepstack LOL. My non-AI cams in BI were triggering all night. This picture was ran through Deepstack (without the IVS or red lines on it) and it failed to recognize a person in the picture, but the camera AI did in my 5442. The only triggers my AI cameras have are from human or car triggers and is doing so with a lot less CPU than sending pics to Deepstack. This pic says it all and the video had the red box over it even in complete white out on the screen:


1613268961041.png
 

Buddym

n3wb
Joined
Jul 17, 2018
Messages
19
Reaction score
8
Location
Germany
Hi Andy,

if the SMD 3.0 doesn't work proper, is it possible to go back to the firmware from december again?

Best Regards Buddy
 

Jomsha

Getting the hang of it
Joined
Oct 26, 2019
Messages
100
Reaction score
18
Location
N/A
Hi , HFW3441 will support SMD 3.0 ?
 

MikeLud1

IPCT Contributor
Joined
Apr 5, 2017
Messages
2,141
Reaction score
4,118
Location
Brooklyn, NY

Wildcat_1

Known around here
Joined
Dec 9, 2018
Messages
2,047
Reaction score
5,867
Location
US
Andy,

What is S2? Also I just received my SD5A425XA-HNR and started bench testing today. So far looks all good, I can not wait till I install it.
@MikeLud1 I think you're going to like the 5A425, be sure to check out my review HERE for tips and tricks on dialing in and feel free to DM with any questions.
 

EMPIRETECANDY

IPCT Vendor
Joined
Nov 8, 2016
Messages
8,259
Reaction score
23,719
Location
HONGKONG
Top