SMD 3.0 dahua

EMPIRETECANDY

IPCT Vendor
Joined
Nov 8, 2016
Messages
4,953
Reaction score
10,929
Location
HONGKONG
Latest news

The SMD 3.0 firmware can be ready next week.
The 54 series will be firstly used with the latest new FW.
Will make invite some guys here to make some testing firstly.

Models List:
IPC-T5442TM-AS
IPC-T5442T-ZE
IPC-B5442E-ZE
IPC-B5442E-Z4E
IPC-HFW5241E-Z12E
1615870260672.png
Andy
 

EMPIRETECANDY

IPCT Vendor
Joined
Nov 8, 2016
Messages
4,953
Reaction score
10,929
Location
HONGKONG
Andy,

What is S2? Also I just received my SD5A425XA-HNR and started bench testing today. So far looks all good, I can not wait till I install it.
S2 version uses SMD 3.0, hardware are totally same as the S1, so when your S1 camera update to SMD 3.0, it will be S2. :D
So that is why buy a updateable camera is important.
 

wittaj

Known around here
Joined
Apr 28, 2019
Messages
5,208
Reaction score
6,945
Location
USA
Does this only impact SMD or also human AI within IVS rules?
 

wittaj

Known around here
Joined
Apr 28, 2019
Messages
5,208
Reaction score
6,945
Location
USA
I know that many feel the SMD needs some work, but I'm not sure how much they could improve the AI within the IVS functions.

From my own personal experience - the true test....I have found the AI of the Dahua cameras to work even in a freakin blizzard....imagine how much the CPU would be maxing out sending all the snow pictures for analysis to Deepstack LOL. My non-AI cams in BI were triggering all night. This picture was ran through Deepstack (without the IVS or red lines on it) and it failed to recognize a person in the picture, but the camera AI did in my 5442. The only triggers my AI cameras have are from human or car triggers and is doing so with a lot less CPU than sending pics to Deepstack. This pic says it all and the video had the red box over it even in complete white out on the screen:


1613268961041.png
 

Buddym

n3wb
Joined
Jul 17, 2018
Messages
20
Reaction score
8
Location
Germany
Hi Andy,

if the SMD 3.0 doesn't work proper, is it possible to go back to the firmware from december again?

Best Regards Buddy
 

MikeLud1

Pulling my weight
Joined
Apr 5, 2017
Messages
113
Reaction score
208
Location
Brooklyn, NY
Latest news

The SMD 3.0 firmware can be ready next week.
The 54 series will be firstly used with the latest new FW.
Will make invite some guys here to make some testing firstly.

Models List:
IPC-T5442TM-AS
IPC-T5442T-ZE
IPC-B5442E-ZE
IPC-B5442E-Z4E
IPC-HFW5241E-Z12E
View attachment 84702
Andy
Andy,

Any news on the new firmware?

Thanks
Mike
 

Wildcat_1

Known around here
Joined
Dec 9, 2018
Messages
1,148
Reaction score
2,560
Location
US
Andy,

What is S2? Also I just received my SD5A425XA-HNR and started bench testing today. So far looks all good, I can not wait till I install it.
@MikeLud1 I think you're going to like the 5A425, be sure to check out my review HERE for tips and tricks on dialing in and feel free to DM with any questions.
 

EMPIRETECANDY

IPCT Vendor
Joined
Nov 8, 2016
Messages
4,953
Reaction score
10,929
Location
HONGKONG
Top