NVR supporting RTSP input?

[Ba10s118]

Hi all.

Do anyone here have experience with any NVR's where you can add RTSP streams as a source?
I've tried some of the cheap chinese, but no luck.
Mainly they require ONVIF.

I have some nice small cameras which has been hacked (Xiaofang) so they can output RTSP streams, and I would like to add these to a NVR.
I not that keen for a Software solution, such as Blue Iris, mainly due to the poor optimization which will spike the CPU usage.

 

[alastairstevenson]

Do anyone here have experience with any NVR's where you can add RTSP streams as a source?

I've used that method a few times on a couple of Hikvision NVRs, 76xxNI-E2, 78xxN-E2.
It worked OK, but of course no event notifications, just used for continuous recording.

 

[Ba10s118]

Perfect! Im just looking into the scenario where i use dirt cheap indoor cameras which can be hacked (got my xiaofang for about 8 usd each).

 

[djayor]

Recently I change the firmware of a Xiaomi Xiaofang 1S with this method: Xiaomi-Dafang-Hacks
I can see the RTSP stream using a VLC in a computer, but I cannot add the streaming in my NVR from Techage 8ch (FW version V4.03.R11.00000202.12201.140000.0000001).

I already try to add manually the IP, port, and login credentials, also deactivating the login in the camera, but I always get "Not connected".
This NVR supports RTSP and ONVIF, and this firmware in the camera also supports both, but cannot find any protocol.

@Ba10s118 did you had luck adding this camera to your NVR?