Make sure your cabling is good and you terminated your cabling properly..a question about this black face camera , i received it yesterday.
Sometimes i loose the connection with the fixed IP adress after settings on the local webpage , someone a already have this problem ?
`
Do you know if i can with the use of IVS use auto tracking or move the preset with motion detection ?
BICK
This model seems no newer firmwareHi guys, i've bought a Dahua ipc SD29204T-GN from aliexpress with an old firmware, i am trying to upgrade the new firmware from Dahua website but it has an error on extract files are missing , i need your help find the upgraded firmware (
Software Version 2.422.0000.3.R.T4.484.9A.NR, Build Date: 2016-10-09)
looking to hear from you soon guys Thank you.
A bit late... but here is a snapshot:I am also using one of these in a stable and it works fine. I can make a snapshot for you tonight in complete darkness to show how it performs.
A difference I noticed is that the IR on this camera looks quite focused. The IR is also much stronger than that of a IPC-HFW1320s which I had earlier.
I made a snapshot with the old camera to compare, but I can't find it anymore. Might have deleted it .
Tried smacking it, switch color modes, etc... no joy... gonna give my nail magnet a try now. Update, magnet and banging harder not successful.I remember something back in the day about using a magnet and moving it around the exterior of the camera to unstuck a stuck ir filter. Something like that.
So I just came across this thread: 7 Dahau cameras lost connectivityBased on my test, seems cameras only reboot when they have a valid gateway, if you point gateway address to a non online ip it works fine.
Later i updated the firmware, and that problem just disapeared (it happen with all the hfw4431s i have)
I used this DH_IPC-HX5X3X-Rhea_Eng_P_Stream3_V2.460.0000.7.R.20170306.bin