Search results

I have the time/date overlays turned off in the Blue Iris GUI, but they're showing in the UI3. I assume there's a separate control for them in the UI but can't seem to find it. If someone knows where it's at offhand and can point me in the right direction, I'd appreciate it.

Instead of fill up the TN plate thread, I figured I'd make a new one trying to dial in my setup. I'm using Hikvision DS-2CD7A26G0/P-IZHS which are dedicated plate readers for my cameras. The angle is about 37 degrees and the distance is right around 100 ft. I've had the settings for the old...

I have a weather station mounted on my roof. It's on a 17 ft pole on the roof of the 3rd story, so it's above all the trees and fairly visible to the neighbors. I would like to mount a camera towards the city for weather observation, but I really don't want to have a big bullet camera sticking...

I can't seem to find the setting to remove the time and date overlay in UI3. Could someone point me in the right direction?

I'm trying to export a clip that is only a few seconds in duration and it's as if the export function freezes up on me. I've selected the specific camera I want, the date and then found the clip where the time was at. The full clip appears to be 2h and 52 m long. I moved the slider to the...

While messing with my BI re-install and tweaking the settings, I managed to somehow turn off the clips on the side panel. The "All Clips" and "Alerts" are no longer showing. They're there in the hard drives. I can go into the folders and click to play them. They're also showing in the...

I did a full windows 10 reset and re-installed blue iris. Now, I'm having some problems inputting my license key. I tried to use the license key from the last time I renewed blue iris (last month). Here's the error message I received. Since that didn't work, I found the license key that...

I had some issues with BI and decided to do a re-install. I downloaded the latest version and now I'm stuck on this "Finalizing Import" for probably the last 14 hours. I assume it's rebuilding the database? Or, it's stuck. I'm not sure how much database I had but probably 80 or so TB.

I just had the oddest thing happen with Blue Iris. A little background with how I have things organized is necessary... I'm using pfSense for my router and all my cameras are on a dedicated VLAN (VLAN30), so I've given them all local addresses that are 192.168.30.XX. I've organized the...

I've had this Hikvision OEM NVR for about two months. I picked up two 8TB WD Purple drives for it. I only use it for LPR storage. Anyway, I was having some service work done and the power to the house was turned off without me being there to shut everything down properly. When power was...

My Blue Iris machine is the only one that I'm having an issue with. It does it randomly. It could be once today and once tomorrow then be good for a couple weeks. I went ahead and did a fresh install of Windows but that didn't seem to fix it, so I'm wondering if it's a hardware issue. I've...

Probably in her late 70s. We went and got her husband who took her to the hospital. The airbags got her pretty good and she probably broke her ankle.

I have a Hikvision DS-2CD7A26G0/P-IZHS that I use for a dedicated license plate reader. I've been saving the license plate data to an onboard SD card, but I'm looking for something with more storage since the SD card only gives me a couple days. I have a TrueNAS server running 12.0-U8 on the...

I have a Hikvision DS-2CD7A26G0/P-IZHS. I have installed an SD card for local storage of license plate numbers. There used to be a couple headers "Live View", "Playback", "Picture", and "Configuration". I used to log into it to access the storage using Internet Explorer "run as administrator"...

For some reason, 5.5.1.18 is shutting down randomly. It seems to happen every 24-16 hours. I'm going to roll it back to 5.5.1.17, so I'm not too concerned about the system, but I’d like to troubleshoot a bit and look into what might be causing it. When I pull up the logs file, it only goes...

The camera will show that it's being alerted when triggered with motion as I've set it up. The red box will be around the camera and the clip will show up in the sidebar on the alerts. The clip will stay there for about a minute then disappear. I'm sure there's some setting I have messed up...

I've updated to 5.4.3.1, but it seems to have happened after the Deepstack update. I have Deepstack AI running on about 8 cameras and it seems to be working well. But, after a bit of time, all the alerts will be blank and the timeline as well. Restarting puts it back to normal. All cameras...

I've never seen this on ipcamtalk. Only on this one thread, I get a pop-up that requests username and password. As you can see in the top right of the picture, I'm already signed into the forum. Any ideas what's up?

I've read some older posts about there being a cap on the size of hard drive that can be added and I've read some other posts with people having multiTB drives. I have a Hikvision LPR and I have a 200Gb micro SD card in it. With as much traffic that goes by, it only holds info for a couple...

I'm running Blue Iris on a Windows 10 machine. I have a Hikvision DS-2CD7A26G0/P-IZHS hooked up for LPR duties. The camera is recording video to BI just like all the other cameras, but I have a micro SD card in it that is storing the license plate info. The card I'm using is 200GB, but it...

I have an 8TB WD Purple where I've limited size to 7200GB and checked "Do NOT monitor free space". The drive is working fine and I'm getting no messages under the status tab, I'm just getting this message in the UI3. Any ideas?

I have a few WD Purple drives in my system. I had each camera recording continuously to one each drive. Basically, one drive has one folder where clips are stored. (Clips and Archiving -> Aux 1 file assigned to hard drive M. Clips and Archiving -> Aux 2 file assigned to hard drive N. Etc)...

Kind of baffled here. I have 6 Hikvision DS-2CD2085G1-I cameras with a few other ones on my system running anywhere between 25% and 40% depending on whats going on. I added another DS-2CD2085G1-I with the same (latest that I could find) firmware. All settings are the same. BVR direct to...

Is the difference just from factor? In what application would one be chosen over the other?

I'm not sure this is a Windows problem or a Blue Iris problem or something else, but maybe someone knows what's going on here. I have a dedicated Windows 10 PC running Blue Iris. Currently, I have five 4TB WD Purple drives and one 2TB WD Purple that the cameras are being recorded to. The 2TB...

I'm not sure what's going on here...after the latest BI5 update, my CPU has been maxing out and the GUI has been closing down. I'm running an i9-9900K and have about 10 cameras all recording direct to disc. Normal ops have been around 15-25% CPU usage. Something's definitely up. It's a...

I'm kind of at a loss here, hopefully someone can point me in the right direction. I have a few DS-2CD2085G1-I cameras. One is on firmware version V5.5.62 build 180822, one is on firmware version V5.6.2 build 190701, and the rest are on V5.6.0 build 190507. I've looked around the EU Portal...

I've done the SADP tool to get the IP address in range. I've done the Intelegent Video Management System, which sees the camera. I'm just trying to log into the camera's IP address and also add it to Blue Iris. admin/12345 doesn't work. Any suggestions?

For some reason, my Alert clips will stop updating. As you can see in the first picture, after a few hours, it will stop showing updated alerts. If I close out Blue Iris and restart it, they're there. The second picture is after a restart. I"m guessing there is some kind of setting that I...

I've got it set to "Record when triggered". It's recording BVR direct to disk. I've set the files to 1 hour or 4GB. The files are there on the hard drive, and when I try and play it back it acts like it's playing a file back, just the video doesn't display. Live view plays just fine. Any...