Search results

  1. Steff

    Dahua IP intercom: VTO3211D-P2 (new P & P4 ) door station - experience, review, firmware support?

    I can just confirm it for VTO3211D-P2. This runs with normal POE. For the indoor intercom monitor I don’t know. My VTH1560CS does not work with my POE switch (Ubiquiti UniFi Switch 24 250W).
  2. Steff

    Selling a Dahua SD49225T-HN-W

    Hi @Jason Connors, you didn't write where you are from, I suppose you are in the states? Gesendet von iPad mit Tapatalk
  3. Steff

    Dahua Intercom kit

    @Gerry1, I would try this: - take the device from power - look in your router which IPs are occupied - power VTO on and connect to network - the new IP is the IP used by the VTO - now the login should work with this IP - if not, I suspect the problem in you browser - try with IE, optionally in...
  4. Steff

    Dahua IP intercom: VTO3211D-P2 (new P & P4 ) door station - experience, review, firmware support?

    Guys you are right. This is one of the quirks and one of the reasons why the devices feel a little bit outdated. On both VTOs (VTO3221D-P2 and VTO2000A) I can only login from a windows machine via IE in compatibility mode/window. With the Mac I see only a grey screen like you @Crazykiller. In...
  5. Steff

    Dahua IP intercom: VTO3211D-P2 (new P & P4 ) door station - experience, review, firmware support?

    The version on my VTO3211D-P2 is 2017-06-30 V1.200.0000. I don't see a possibility to extract the firmware. Anyhow, as long everything runs Ok, I see no need to update the firmware (except you need the SIP access). Or are there known improvements?
  6. Steff

    Dahua IP intercom: VTO3211D-P2 (new P & P4 ) door station - experience, review, firmware support?

    I'm not 100% sure but I think the push notification is induced by the VTH. When I did shut off the VTH I didn't get push notifications anymore.
  7. Steff

    Looking for a good door intercom, any info on Dahuas VTO3211D-P2 and VTH1560CS

    @int , I'm not sure but I think the push notification is induced by the VTH. Do you have a VTH? I think when I did shut off the VTH I didn't get push notifications anymore.
  8. Steff

    Looking for a good door intercom, any info on Dahuas VTO3211D-P2 and VTH1560CS

    @int , Yes, I'm still happy. The setup has most of the features I want/need. The user interface on the VTH feels a bit dated and is a little bit confusing/complicated. The VTO browser accessibility is the usual pain ... Unfortunately there is no access on the VTH1560CS via browser, changing the...
  9. Steff

    Dahua IP intercom: VTO3211D-P2 (new P & P4 ) door station - experience, review, firmware support?

    My VTO3211 still has firmware version 1.200.0000.0. release 2017-06-30. Language is only English. I didn't find something newer. For the VTO2000A I found an international firmware at Goliath (v 3.1, R 2017-04-02), there is also a SIP firmware available.
  10. Steff

    suggest Dahua outdoor ptz for roof viewing

    I would suggest to look for a 2MP starlight PTZ model, take a look here: Product selector, compare Dahua products, Network Camera, Network PTZ Camera & NVR, HD-SDI Products,Dahua Technology Like the SD49225T-HN, the SD49212T-HN or possibly the new SD1A203T-GN - depending on your budget and the...
  11. Steff

    New firmware for IPC-HXX5231XX Released on 201711

    @jazzy1 Updated the firmware on my HDBW5231R-Z last night. I used the PAL version. Everything went fine. Like the others already said, there is now an additional automatic update option - which can easily be disabled. The one thing I was hoping to be improved was now corrected: with the old...
  12. Steff

    Dahua IP intercom: VTO3211D-P2 (new P & P4 ) door station - experience, review, firmware support?

    Yes you are absolutely rightjemesecurise, thanks for your info! Via web interface I can also only set these resolutions: Even though I was able to set the resolution on my NVR to 1080P. This then must be without effect. I was also wondering why the resolution keeps changing back after a...
  13. Steff

    Looking for a good door intercom, any info on Dahuas VTO3211D-P2 and VTH1560CS

    The pics were taken via snapshot function in iDMSS. I tried to set the bitrate to 2000 or higher and also to the highest resolution over my NVR - but these parameters seems to keep changing automatically anyhow. I tried the MIFARE reader some weeks ago - just to test it. It works fine. One of...
  14. Steff

    Looking for a good door intercom, any info on Dahuas VTO3211D-P2 and VTH1560CS

    Thank CCTVcam for your input on the lock security. You are right before unscrewing the intercom and shorten there the right connectors the burglars will use brute force to get in. Ok, the decision on picture quality is a personal preference. But keep in mind that the devices also have also...
  15. Steff

    Dahua IP intercom: VTO3211D-P2 (new P & P4 ) door station - experience, review, firmware support?

    Unfortunatly the Dahua intercom monitors don’t work with standard POEs. At least my VTH1560CS didn’t work. So either use - the VTNS1060A, - use a power adapter, or - power with an injector. Since my monitor is yet not mounted properly/finally I currently still use an 12V power adapter.
  16. Steff

    Looking for a good door intercom, any info on Dahuas VTO3211D-P2 and VTH1560CS

    I power most of my devices over POE, and for the non POE ones (e.g. the SD29204T-GN-W) I use a POE splitter/adapter. What you can also see in the comparision picture is the effect of the maximum camera tilt the VTO2000A is capable of. The green frame is shifted to the right. I did turn the...
  17. Steff

    Looking for a good door intercom, any info on Dahuas VTO3211D-P2 and VTH1560CS

    Maybe, we are also fooled by the viewing angle?! Because: when comparing the details of the objects there are less "pixels per arc minute". The green frame underneath shows the viewing angle of the VTO2000A in the image of the VTO3221D-P2. So there are only 1/4 of the pixels vs. full...
  18. Steff

    Looking for a good door intercom, any info on Dahuas VTO3211D-P2 and VTH1560CS

    Yes INT, you are right. I had the same impression yesterday before uploading the images, the VTO3221D seems a bit out of focus. At my initial comparison in December I clearly liked the image of the VTO3221D more. Perhaps it changes in the dark. But anyhow both are equally bad if you compare...
  19. Steff

    Looking for a good door intercom, any info on Dahuas VTO3211D-P2 and VTH1560CS

    Edited the post and added model names.
  20. Steff

    Looking for a good door intercom, any info on Dahuas VTO3211D-P2 and VTH1560CS

    Here are the images for comparision ... VTO2000A VTO3221D-P2
  21. Steff

    Looking for a good door intercom, any info on Dahuas VTO3211D-P2 and VTH1560CS

    As far as I remember I had to use the Dahua specific update tool (config tool) for the VTO2000A, but I also did flash the same version number but another language release. I didn’t had an automatic update for the VTO/cams as far as I noticed. Gesendet von iPhone mit Tapatalk
  22. Steff

    Looking for a good door intercom, any info on Dahuas VTO3211D-P2 and VTH1560CS

    Hey int, Yes, you are right. Out of the box there is a message from the speaker every time you ring the bell. This is kind of annoying and I turned it off. You can do this via the setup in the web interface, individually for the different events (on ring, for the message box, if the door is...
  23. Steff

    Looking for a good door intercom, any info on Dahuas VTO3211D-P2 and VTH1560CS

    Hi int, I tried to hook up the VTO2000A again, to make a comparison of the viewing angles with the VTO3211D. Unfortunately I wasn’t able to get a picture. (I wrote the device did seem less stable, as I tested it some weeks ago, a full reset and a new IP address did help last time - but didn’t...
  24. Steff

    Looking for a good door intercom, any info on Dahuas VTO3211D-P2 and VTH1560CS

    I just wanted to give you a short summary of my experiences with the above mentioned devices for the front door. I finally installed one of the two intercoms after playing around with both of them. The indoor monitor station VTH1560C works fine. The setup was very easy, the menu navigation is...
  25. Steff

    Looking for a good door intercom, any info on Dahuas VTO3211D-P2 and VTH1560CS

    The maximum time to display a live stream of a cam in the VTH1560CS is 300 seconds (5 minutes). You can prolong the time only at the end of the timer for the same period. So there is no "alway on picture" possible. I think it will be the same for all Dahua VTH stations that share the same...
  26. Steff

    Looking for a good door intercom, any info on Dahuas VTO3211D-P2 and VTH1560CS

    You can also add normal IP-cams to the monitor. There is a special button where you can switch between intercom cams and the previously registered IP-cams. Perhaps you will have to do an extra click. No sure if you can set the timer on “always on”. Can have a look later. I‘ll also give quick...
  27. Steff

    Keyboard/joystick for PTZ on Dahua NVR. OEM or cheaper alternative?

    Hi Nigel79, did you find something? I'm looking for the same. Or does anybody else know an alternative?
  28. Steff

    IR Hotspot

    I would try to solve the problem with a diffusor or a (plano-)convex lens, as it is sometimes used in LED flashlights. Try to put some semi-transparent Scotch tape or lenses on the outlets of the infrared diodes. Even though zoomed there will be less light on the scene, it may be sufficient...
Top