EMPIRETECANDY
IPCT Vendor
yes, also can work on the full color model too.
Yes as @bigredfish mentioned @Burton_Flooring SMD is an extension of MD, you must have MD enabled to use SMD. Its certainly a better way to filter out nuisance caps from MD BUT if you really want to get ahead then setup for IVSOnce in the camera per above, you have to enable regular MD and then SMD. It’s an enhancement to regular MD.
But as @wittaj said, most prefer to use IVS rules over MD/SMD. Far fewer false alerts.
SMD, SMD PLus, SMD 3.0 ... for now they only work on DSS and DMSS software, while on SmartPSS it doesn't work and you can't search only for vehicles or human in SmartPSS which is the purpose of SMD (Smart Motion Detected)Ok, I'll read through that thread. The trouble I'm having is that I'm not sure how SMD shows up in the NVR search. Is it listed as "Intelligent" etc. Because I have it setup and when I look for recordings there's nothing. And I have it set to high sensitivity.
But, again, I need to read through that whole thread, maybe my answer is in there already ;-)
Thanks y'all for your help.
No, you don't want Motion or SMD turned on when using IVS.For IVS to work, does MD have to be on or can i turn it off?