Loryta IPC-B5442E-Z4E 4MP Starlight+ WDR IR 8mm–32mm Motorized Lens Bullet

[bigredfish]

Mine are similar to @biggen except I use a fixed manual shutter at night

5231=Z-12 at about 90-100ft

Night


Day

 

[biggen]

I'm using the same Z4E he is. I wished I had the Z12 at my distance but at 40 feet the Z4E should be perfect for him.

Yeah, I those pictures look like a low resolution to me as @bigredfish suggests. Something looks off. It may be time to reset the camera and start from scratch with new settings.

 

[aboyz]

I think he has a Z4 - 32mm less than 1/2 the zoom as ours...

What resolution are you running? That looks like a substream or maybe 2048, which isnt enough for a 4MP camera . Change it to 8192

are you talking about this setting? let me know if i should set it higher..

 

[aboyz]

Mine are similar to @biggen except I use a fixed manual shutter at night

5231=Z-12 at about 90-100ft

Night
View attachment 77250 View attachment 77251 View attachment 77252 View attachment 77253 View attachment 77254

Day
View attachment 77255 View attachment 77256 View attachment 77257 View attachment 77258 View attachment 77259

Thank you so much for the configuration. I changed it to 8196 and the video is coming in much nicer.. please take a look at the recently shot. I also moved my camera out all the way to the house corner and shooting as far right as possible.

 

[aboyz]

arg.. that one picture was capture nicely because maybe it was going slow.. but this car drove by and the license plate is still unreadable.. maybe his license plate is dirty? but during the day it should be ok right.. Attache is my final setting i have adjusted.. made so many adjustment..

 

[aboyz]

here is my final configuration.. and thank you all for your help.. much appreciate..

 

[bigredfish]

Turn your resolution back to what it was, 1920x1080 is 2MP, you should run 4MP - 2688x1520

 

[aboyz]

i think we are good to go.. i'll test more.. i think this setting is very good. thank you all..

 

[biggen]

Its still not as clear as it should be to my eye. Wait till night to declare victory.

 

[wittaj]

Bitrate looks low based on the pictures and the pictures look elongated? Is it native or did you stretch it?

 

[biggen]

Here are my resolution settings for the same camera.

 

[Jomsha]

I think there is a problem with the encoding of Hikvision NVR and Dahua camera.
Check that all the encoding both on IPC gui and NVR gui are in the highest level.
The 5442 camera is really good camera. And all the photos you are posting looks like sub-stream!
Stop changing camera settings and start to change the ENCODE settings.

 

[Jomsha]

Look at the differences. Its not just the plate. Its the whole scene resolution bad!

 

[aboyz]

ok guys. its night time. for some reason the plate is not being seen by IR. attached is the photo..

 

[bigredfish]

Because the camera is in color. it must be forced to B&W

 

[aboyz]

here is my setting ..

 

[aboyz]

maybe you are right.. the night time didn't kick in yet.. we will wait

 

[bigredfish]

Use the "Schedule" profile on the camera to force it to change to B&W 30-45 minutes BEFORE sundown and back to color 30 minutes AFTER sunrise

 

[wittaj]

Yep - now you will need to have someone go out there and stop a car in the field of view because there is nothing for it to focus on right now. So your next image will be a blur.

 

[aboyz]

yeah.. for some reason the IR is not on.. let me go to the camera and see if it got the 4 red light on.