Yes. It's true since first firmware for this NVR!i updated my DS-7808-E2 and i was having issues, so i reset to defaults and now the NVR is in Chinese :-(
DONT RESET THE NVR TO DEFAULT IF YOU HAVE A PATCHED NVR
So anyone (that will not charge me for the info) have any idea how i patch the NVR's region back to English?
thanks
Just the region is still CH , i have the NVR back to English i get the same issue if the NVR is in English or Chinese on 3.2.1 all good on any version below............But when he was with the English language there are other problems, but when It became a Chinese - problem disappeared!
i updated my DS-7808-E2 and i was having issues,
What issues / problems ?But when he was with the English language there are other problems, but when It became a Chinese - problem disappeared
May of been better to use the method I usedi used the firmware tools to change the region to 1 so i could upload the firmware
TBH i dont think it would make any difference as it worked utill i reset to default, i went back to 3.0.8 as it dose not check IPC? (the language of the camera) so both EN and CH region cameras will connect but when i upgrade to 3.0.10 only the cameras in the same region will connect using hikvision protocolMay of been better to use the method I used
http://www.ipcamtalk.com/nvr-s-dvr-s-and-computers/2202-flash-multilanguage-firmware-chinese-ds-7608n-e2-8p-ds-76-78-79-ex.html
Or maybe not, lol
Why 3.0.8 and not the later 3.0.10 ?
Have you tried upgrading your 7608N-E2 8P NVR yet? I have same NVR and would like to know if this firmware would work and provide any benefits.... My first priority is finding where / how to switch telnet on, and second is to ponder about 'upgrading' my 7608N-E2 8P, lol
No...Have you tried upgrading your 7608N-E2 8P NVR yet?