Does anybody know which IPC is running a processor=HI3516CV300 and mem=128M ?
Thanks.
Update: I know that I have the wrong uBoot, so that I do get this error message:
mboot type error, quit upgrade! ImageName=hisi3516cv300-nand, imageName=ssc325-spinand, svn_version=0x2fdb
So again, does...
It seems I bricked an IPC from Dahua wiht a wrong firmware - so far so bad.
Have now tried to upload an old version via UART and TFTP, but it seems the systems does not allow any longer an upgrade or a downgrade.
I have a successful connection via UART and TFTP, but each "run" commands ends up...
In #2 was the question about visible or IR-light.
Does it make sense to use non-visible 940nm light ? Will the light be recognized by Dahua IP cameras ?
Thanks to all for the recommendation of Tendelux DI10, however I have not found any dealer in germany and the shipping cost of amazon.com is very expensive.
Hello,
I have several Dahua IP cameras (5442T, *-TM, 2231T) in use and I am very satisfied with them. However, I would like to have better night vision for one or the other location. This is not to say that the cameras provide a poor image, but it could perhaps be a little better. Maybe it's...
Thanks for your replay. Have tried it on WiFi and also GSM. I still believe it is an app issue.
iPAD:
- DMSS-HD
-- IP connections works
-- DNS connections works
iPAD:
- DMSS
-- IP connections works
-- DNS connections works NOT
iPhone:
- DMSS
-- IP connections works
-- DNS connections works...
Hello,
I use various Dahua cameras at home (all via LAN) with a Fritzbox. I use the DMSS (iPhone) and DMSS-HD (iPad) for monitoring.
To access my parents' camera WITHOUT a VPN (yes, you shouldn't do this - but it's necessary here), I forwarded one port in the FritzBox for DMSS to 37777 - so far...
Hello,
since years I am using IPC of Dahua and I am still happy.
To view the IPC in the flat of my parents, I have created a port-forwarding from 39000 to 37777 (TCP) for the DMSS app - so far so good. It was working since month.
(I know, I should use VPN, but for several reasons I am using...
Yes I did.
If I edit the user/password described in #7 to admin (with the correct password), click OK and did a refresh, the status led is red within 1 second. After changing the user to admin2 (same password), click OK and do a refresh, the status led is green in 1 second.
This does not work - unfortunately.
I have edited both user (admin and admin2) in the WebUI of teh camera to the same password, both users are member of the admin-group.
If I use the user admin2, I do see everything in the NVR (green) - if I use admin I do see nothing (red) :-(.
Hm, are you sure that this is based on ONVIF ?
If I create a new user on the cam under /System/Account/Acount (admin2) as described above, I do see everything in the NVR. I have not changed or created a new user under ONVIF !
Have already tried this with no success.
However, if click on "LIVE" button after "Search Device" I do get message "Account is locked" ?
Have created a new admin2 on the Camera and now I can see it in NVR ! That is strange.
How can I unlock admin on the camera ?
However, normal login to the...
Hello,
I want to come back to this thread. Friend of mine has bought a Dahua IPC-HDW1430DT-STW from an official store in germany. However, we have seen that this camera does not allow to store data on a FTP-Server. The only allowed target is SD-card.
Due to several reasons we have only 12V at...
Ok, camera (IPC-HDW1430DT-STW/IPC-WD42) arrived and my friend has bought it from a local dealer. Installed firmware was 2.800.0000000.1.R, but unfortunately it does not allow to store data via ftp - the only destination is local.
Therefore I have installed the firmware 2.800.0000000.13.R, but...
I can not answer both questions, because as I said before the camera is still on the way.
Just to know, after receiving the camera and checking the installed version.
Hello,
due to several reasons (there is only 12V available), a friend of mine has ordered a HDW1430DT-SDW, which has also WiFi - yes, I know WiFi is not the best option, but in this case he has choosen this cam.
The cam is still on the way and I have checked for the latest FW on...
Have found the solution. It seems that the HWID during last uodate was changed to an ID fot VTH5221 - the HWID is fully different to VTH5241.
After changing the HWID in the bootloader, my VTH is back :-).
Hello,
long time ago I completely shot up my 10" VTH5241DW (Gen1) with a wrong firmware. A rescue via TFTP/serial was unsuccessful after long attempts.
Thereupon I got myself a new Winbond 25Q256 chip, flashed the latest FW and now had it replaced by someone who can solder :). So far so good...