Search results

Hi, Samsung SGS21 & other android tablets. New to TinyCam, always liked it but to be honest IpCamViewer was my first & just stuck with it. However increasing IpCamViewer often does not stream that well, losses connection with some camera's. Is perfect with the majority but always a few that...

HI, I know this thread was started a long time ago but recently re-visited. I had BI for years & always assumed it was leading edge but like iL-Pres I want it the ALPR so timing is essential My problem is (& good for reading plates) is my camera is almost face on, so it seems to struggle to get...

I record 2 separate streams from the same camera (They are the same camera but call A & B as they have two separate configs is BI, NOT Main & Sub Stream) It would be very helpful for this and other situations & in the past if a clip from elsewhere or different camera could be played through a...

I have Users set to 99, shortened clear time etc. etc. More as an indicator using UI13 from another PC on local LAN sometimes won't allow log on with user limit message. My main problem is I have python script, on the same server PC that is triggered on movement, TRY's to get data from the...

Thanks for the info Rather than getting just a lecture I would have hoped someone could have advised on the question I asked "They all have 0:00:00 as session & 0 frames. If they had got through, would it show session time?" I would have liked to know if someone had access to the BI videos...

Hi, Only just noticed that in connections that there are some unknown www & WAN IP's. e.g. hat.census.shodan.io teliacarrier-cust.com Settings : I have 20 logins, usual ban after 5 attempts, release after 1 hour. Have pretty good PW. They all have 0:00:00 as session & 0 frames. If they had got...

OK, thanks for fast response, I know persisting to try & do both is foolish, I was so very close & in fact did work really well when the car was under 5pm an 10 feet from the gate but over the last 20 feet cars could be a quite different speeds and stop either 5 to 15 feet away & those stopping...

Never seen those POE passive splitter before so that will be a good option, thanks. Now struggling to get the LPR image but of course first of many settings. Lot worse than my original (1st post) default settings with colour. I had not changed gain or brightness so perhaps that's where to start...

Many thanks to all of you, going to try Manual 1/125 or 1/250, DNR 35 & keep colour for the moment. Trying to avoid 2 camera's mainly because only have 1 cable, 50m from house & JUST managed to get 1 fed down conduit. Do have power but prefer not to box more power socket & switch as will look...

Hi, Thanks for your very fast response. DNR was 50, Should I try grade 30 ? Was auto, shall I try shutter priority first as quite well lit, I know someone above said manual but they seemed to be for almost dark B/W scenes and wonder if a good compromise for a half decent normal (non-LPR)...

Hi, I know an old thread but as such knowledge shown above I thought would ask here, ref. LPR Just got a lesser Dahua DH-IPC-HFW2531S-S-S2. Cheapo generic almost worked so did not think had to go higher up the cost. Excellent daylight & just about working night time but yet to fiddle with...

Have a SV3C camera 5mp but have reduced. BI reports 12.50 fps VLC & onvif reports 25+FPS as per camera setting viewing via VLC also shows smooth video so must be close to 25fps viewing through BI direct is jittery so assume is the 12.5 fps. lowered camera source to 0.4 mp & still 12.5 fps...

Hi, SOLVED or way round. cmd CLIP JSON does have this information, the file name so can use that. below is how it works. Trying to reference the .jpg alert image in python. I save the &ALERT_PATH to a text file (also the same if I send to MQTT) The text file or MQTT payload is...

HI, I want to really test a clip, using the playback & analyse with motion AND deep stack. I would like to play a clip or video as if it were now and ideally create a new clip & specifically the alert image that is created & the subsequent alert actions. I know all the thing can be done...

Hi, Camera has to be at a bit offset an angle for my best mounting position, fixed camera. I use to open an electric gate. Deepstack to get LPR & avoid sending non car images & Platerecognizer really good at getting plates even at an angle. Free as under easy under 2500 pm. Works 99% day time...

Hi, thanks for the follow up, All working great, BI & Shelly, I actually spent more time using the shelly direct with MQTT to send alerts to Telegram messenger as a backup (more primary really) to my phone if the alarm goes off. This uses my NAS & some python programming so if the BI PC goes...

HI, Thanks for all your advice. I originally got the (cheap) camera really just to see who was at my new electric gates so I could control via App etc. so did not need anything flash. It is also offset, more to view the people than the plate as my original plan. Later I realized that I could...

Have a fairly generic Chinese camera, in UK : SV3C WiFi Security Camera Outdoor Wireless 1080P CCTV IP Camera BI 5, have 5 other cameras' all quite low DPI & FPS 5-10, pretty fast i7 running at about 25% CPU. Always kept cameras before in range FPS 5-12 as no needed any more so not demanding...

Eventually got the http working on the shelly to alarm a BI camera. Somehow I think the camera config got corrupted (v.unusual) but removed & re added the camera & it worked straight away) Works v.fast & well, fine tuning now. I am using alerts action to send a Push Notification to my phone...

Hi, Not sure if I have missed something obvious I have the camera below & as far a I can see it should not be getting triggered or recording anything It is pretty much continuous, record 14 seconds, stop & record straight away again. It is marked as jpg DIO , I have not setup or using DIO so...

Hi, Thanks for all your help, feel bad when someone (not sure if you) has gone to a LOT of trouble laying out the instructions in such details & I did not have the decency to read it, to be honest I thought it was just a link to the image already in view but I should have checked. What a...

That looks really good, so this is in effect the relay & trigger for BI. I did not say before as I figured I would a have to sort the relay side of it because the output from the alarm is the siren 12v & not a switch. So the shelly is powered by 12v all the time and when the alarm triggers it...

Follow up to my previous post, I thought to keep it simple & safe I set up a duplicate camera instead until I can really understand the substream on one source. The trouble is the Alert camera did not pick up on a clear DS & movement trigger? I 100% know it should have alerted. The only think...

Just trying to figure out is this is a real option. I have an alarm, don't always trust remote alerting via their cloud server. I wondered if I can connect the alarm output (via relay), no Volt NOpen or NClosed into a camera. (not sure which camera, I m in the UK, I have lots already but none...

Little off topic but seems the knowledge is here. Trying to LPR at my gate Just set up deepstack to narrow alerts to car & LP but using PlateRecognizer for the actual OCR All works really well now but decided would like to record all the time but min resources. I set up the substream...

Excellent explanation, I know understand the Test & Train & of course makes sense. your code ###python file - Custom_LPR_detection_v20201229### worked great & even with my, poor Test & Train dataset. Yes, sorry I did not explain myself very well, I was referring to the google collab and...

I hate to ask as I guess I should be able to work out for myself but it takes so long to load & train that hopefully someone can advise quickly. Slowly implementing the APLR code above - great work, would have taken me a year to get that far. Test & Train folders? are they meant to be the...

Little off topic but seems a lot of experience here. Trying to get Plate Recognizer to run script or do anything (have same action to make sound, send email etc etc) on detecting a plate that is in the required AI Object box. If I remove that X40KBR so the box empty, it runs fine. Top left &...

Hi, You are obviously having success with BI & Plate recogniser. I am to some degree but cannot get it to run a script/program. (not to do with service or user etc) It shows the number in the alert. PR shows it on the dashboard but I do not think BI is doing the right thing with it. If I have...

Been struggling for some days now. Using BI built in Plate Recogniser (APLR) as looked easy & straight forward & detects LP's really well. Testing using the alert button from the main page with all the cameras, APLR Dashboard shows is has been detected correctly. BI alerts on left now shows...