Webcasting two cameras on same streaming?

grigione

grigione

BIT Beta Team
May 1, 2014
39
6
I want ask if is possible streaming two camera auto-cycling webcasting their on same streaming
 
Yes. Put both cameras into the same camera group. Make sure they are the only cameras in their group. Then enable the group's camera cycle stream here:



 
ok... autocycle work but in streaming i see only a camera However in each camera i can set a different streaming url instead I want set a unique streaming url for both cameras If i set same streaming url in both cameras don't work
I think that is'nt possible see both cameras in autocycle in a unique stream
 
Last edited by a moderator:
It is possible with jpeg/mjpeg streams. You just put a @ before the group name in the URL, and that tells Blue iris that you want to view the auto cycle stream.
 
I have never tried to stream anything to ustream, but I doubt they will take jpeg/mjpeg streams. You probably have to push a stream to them, right? I don't think Blue Iris is wired up to stream an auto cycle stream that way, but here is a kind of convoluted approach you could try.

Create a new camera and make it the generic MJPEG stream request type (near the very top of the camera type list).

IP address should point back at your Blue Iris server, like this: 127.0.0.1

For a path, enter /mjpg/@groupname/video.mjpg where you replace groupname with the name of your group.

If done correctly, you will now have a new camera defined in Blue Iris that automatically cycles between your other two cameras. I think you can probably configure that new camera to send itself to ustream.
 
Thanks your method work!!!!!!!!!!!!!!!!!:peaceful::peaceful::peaceful:

Ps
Work very well with version 4.0.1.14
But If i update Blueiris to version 4.0.2.0 or 4.0.2.1
Blueiris after some minutes of work go in crash
There is some bug in last versions of Blueiris:mad-new:?
 
You must log in or register to reply here.
Top Bottom