So, I been noticing lately some of my cameras are experiencing like skipped frames or what ever this affect is called. I am sorry but have no idea what this exactly is.. I am guessing skipping frames .. Should I try to turn the bitrate down up ? Different codec ?
I am using Intel hardware accelerator default. This is happening to some of the cams. I think cams are doing h265 and direct to disc recording on Blue iris off course. Just don't even know what this is called or is..
I get the same thing using Intel Hardware acceleration with H.265, but it's much worse. I have a much older CPU i7-6770. Does it go away if you turn hardware acceleration off?
I get the same thing using Intel Hardware acceleration with H.265, but it's much worse. I have a much older CPU i7-6770. Does it go away if you turn hardware acceleration off?
and what does your BI status / cameras page look like?
i would try lowering the FPS on that cam to see if it improves. 15fps should be plenty... it could be the camera itself can't keep up with the stream at that rate... just cuz the cam CAN do 25fps @ 8mp doesn't mean it can do so reliably.
I have a camera that does that on H265 so I run it H264 and now no problems. Like someone said, just because a camera is "capable" doesn't mean it actually can. How many truly meet their IR rating LOL.
and what does your BI status / cameras page look like?
i would try lowering the FPS on that cam to see if it improves. 15fps should be plenty... it could be the camera itself can't keep up with the stream at that rate... just cuz the cam CAN do 25fps @ 8mp doesn't mean it can do so reliably.
I believe camera is good in this case as camera also has a micro sd card where it dumps the ivs events to and this was one of those and the footage which is on the camera Micro SD is completely fine...