LPR motion question.

[trapper]

I don't have any other motion detect settings active/enabled.

That should be capable. Maybe try dropping FPS to 15.

 

[trapper]

one additional question 4 of my original cameras I can not log into because I have the wrong password what is the easiest way to get access and assign a new password

 

[wittaj]

one additional question 4 of my original cameras I can not log into because I have the wrong password what is the easiest way to get access and assign a new password

Unless you did something, they take on the user and password of the NVR.

But if you cannot get into them, unplug them all and then factory reset the camera and it will take on the user and pw of the NVR.

But do not plug them all in at once.

 

[trapper]

great thanks.

 

[trapper]

can you recommend a motion detect settings. I currently full time record 24/7 with motion detect on so it is easier to see on the time line when an activation happens

 

[trapper]

finally got it right thanks to Wittja. I matched the frame rate and lowered the fps to 15 and just like magic its fixed thanks so much

 

[samplenhold]

finally got it right thanks to Wittja.

@wittaj strikes again!