LPR motion question.

trapper

Pulling my weight
Joined
Feb 11, 2017
Messages
224
Reaction score
241
Hello I installed the LPR and I am in the initial set up. My motion detect setting triggers right when the car enters the picture however the car passes out of view right before the trigger resets. what settings will fix this issue. thanks again for ll the help
 

Flintstone61

Known around here
Joined
Feb 4, 2020
Messages
6,587
Reaction score
10,894
Location
Minnesota USA
you can try turning the Pre-trigger video buffer higher. This cam is set at 9.0 seconds. and turn down the time on the ( MAKE time)duration to .6-.7 seconds.

ttle.Screenshot 2022-06-21 222231.pngScreenshot 2022-06-21 222151.png
 

Flintstone61

Known around here
Joined
Feb 4, 2020
Messages
6,587
Reaction score
10,894
Location
Minnesota USA
You can probably turn off/Deselect " Object detection" and try setting the Algorithm to " Simple"
 

trapper

Pulling my weight
Joined
Feb 11, 2017
Messages
224
Reaction score
241
will try your suggestion. I will also be trying my first might time capture tonight
 

wittaj

IPCT Contributor
Joined
Apr 28, 2019
Messages
24,433
Reaction score
47,556
Location
USA
We need to see your camera settings in the camera GUI - quick glance is not a fast enough shutter and too low of bitrate.

What are you using for motion - the camera or NVR or BI or something else? I get the impression you are trying it without a VMS?
 

wittaj

IPCT Contributor
Joined
Apr 28, 2019
Messages
24,433
Reaction score
47,556
Location
USA
Drop NR down to 30 or so.

Change illuminator to manual and make it 100.

Keep in mind that the focus for night time with B/W and IR might be different than the focus during the day. You might need to stop a car in the field of view to dial in the focus.
 

trapper

Pulling my weight
Joined
Feb 11, 2017
Messages
224
Reaction score
241
any suggestions on this one Screen Shot 2022-06-21 at 9.36.43 PM.pngthe focus looks clean just does not pick up the plate
 

trapper

Pulling my weight
Joined
Feb 11, 2017
Messages
224
Reaction score
241
hello again after taking advise from several members I think I have my first official night time plate capture thanks again to all the above members who showed me the way
 

Attachments

wittaj

IPCT Contributor
Joined
Apr 28, 2019
Messages
24,433
Reaction score
47,556
Location
USA
You do not have enough light to run in color.

Most of us run B/W with infrared to take advantage of the reflective properties of the plate:

1655959985939.png
 

trapper

Pulling my weight
Joined
Feb 11, 2017
Messages
224
Reaction score
241
there is a street light directly above zone
 
Top