High CPU usage with only 28 Cameras

[Saymon Fernandes]

Hello,

I have a BlueIris Server with the following configuration:
I7 6700K
16GB Ram DDR4
1TB HDD

Currently runing 28 cameras and my CPU usage it's too right i think, in a average of 65%.
I Need to run 64 cameras in that server. I notice that a few cameras runs with a very right bitrate, i tried to decrease but the video quality drops a lot and the bitrate don't decrease in a significant amount. Sending a image of the bitrate:



Also, all my cameras are configured like this:


And my blue iris like this:



Thanks for the help.

 

[fenderman]

are you running the demo? are you remoting in?

 

[Saymon Fernandes]

Hello,

No, i have a actually licence.

 

[Saymon Fernandes]

I usuly acess the server using Team Viewer.
The server is conected to two tvs that i monitor the cameras.

 

[fenderman]

I usuly acess the server using Team Viewer.
The server is conected to two tvs that i monitor the cameras.

check without using teamviewer...
What type of tv? 1080p or 4k?

 

[aristobrat]

Are any H.265?

 

[Saymon Fernandes]

How i will check without using team view ?
It's a 40 inch tv 1080p

 

[Saymon Fernandes]

No, all the cameras are .h264

Are any H.265?

 

[Saymon Fernandes]

The cameras are Foscam.

 

[Jareds]

Seems high, is this a dedicated machine? Are u using the on board video or an add on video card

 

[Saymon Fernandes]

Seems high, is this a dedicated machine? Are u using the on board video or an add on video card

Yes, it's a dedicated machine. Using onboard video card, but i'm not using hardware aceleration.
What u think that could be ?

 

[fenderman]

Yes, it's a dedicated machine. Using onboard video card, but i'm not using hardware aceleration.
What u think that could be ?

you should be using hardware acceleration

 

[Saymon Fernandes]

you should be using hardware acceleration

Ow. So i will not be able to run 64 cameras with that hardware ?
What video card shold i buy to run the 64 cameras ?

 

[fenderman]

Ow. So i will not be able to run 64 cameras with that hardware ?
What video card shold i buy to run the 64 cameras ?

hardware acceleration is an option in blue iris...you must use intel hd video you already have...read the help file and this forum..you will be able to run 64 cameras because you are running 1mp cameras at low frame rates...
next time stay away from foscam junk cameras

 

[Jareds]

don't change network card. Use on board video. just enable hardware acceleration like stated above and u should see a big drop

 

[Saymon Fernandes]

hardware acceleration is an option in blue iris...you must use intel hd video you already have...read the help file and this forum..you will be able to run 64 cameras because you are running 1mp cameras at low frame rates...
next time stay away from foscam junk cameras

What cameras did u recomend ?

 

[fenderman]

What cameras did u recomend ?

There are a million threads on this forum discussing cams...
foscam is low end bottom barrel garbage.

 

[Saymon Fernandes]

don't change network card. Use on board video. just enable hardware acceleration like stated above and u should see a big drop

I'm using the hardware aceleration on the general options on cameras section(see the image that a send in the first post). But in each camera in the video section the option: H.264 HW DECODER it is Default.
Is that right ? Or should a change to yes(no vpp) ?

 

[fenderman]

I'm using the hardware aceleration on the general options on cameras section(see the image that a send in the first post). But in each camera in the video section the option: H.264 HW DECODER it is Default.
Is that right ? Or should a change to yes(no vpp) ?

yes leave it defaut..in the main blue iris options setting also set no vpp...

 

[Saymon Fernandes]

yes leave it defaut..in the main blue iris options setting also set no vpp...

It was already like that =/.