Help with Text document install/fine tuning

kees

n3wb
Apr 20, 2017
13
0
Netherlands
Hello,

Is there someone who can help me with:
  • A document with step by step install off BI Tools 1.2.2 (specially Pushover notification by motion detection).
  • Can help me in Dutch
tnx Kees
 
Mike said:
...I have put together athread to act as a 'help file' or a place that provides details and explanations on how to use the software, what each feature and setting does, etc. If you cannot find the answers you are looking for in the help file then you may ask for support in this thread....

Blue Iris Tools Help File
 
Biggest problem is:
entered api for pushover.
test is successful. Result is sound on phone.

did successful installed email notification.

On motion detection camera, I receive an email but no sound notification.

Did several attempts last year but does not want to work. Today tried it with the install off BI for Android....no succes.

Any tips?

kind regards
Kees
 
Biggest problem is:
entered api for pushover.
test is successful. Result is sound on phone.

did successful installed email notification.

On motion detection camera, I receive an email but no sound notification.

Did several attempts last year but does not want to work. Today tried it with the install off BI for Android....no succes.

Any tips?

kind regards
Kees
I think you may be confusing BIT alerts with BI alerts? BIT does not give push notifications for motion alerts, the only alerts it will give is via the Watchdog.
 
  • Like
Reactions: fenderman
Ok tnx for that info.

So I need Alexa to get push notification up and running?
 
What I want:
On motion detection a push message to my phone.

What I saw in the setup that adding phones is done through Alexa

added two screenshots of my setup.
 

Attachments

  • sreen2.png
    sreen2.png
    40.4 KB · Views: 402
  • screen1.png
    screen1.png
    657.8 KB · Views: 442
Push notifications sent to a phone based on motion is accomplished by setting it all up in Blue Iris.....period.
No Alexa or Bitools required.
It's all in the help file. Find an online translator to run the help file through.