ds-2cd2t42wd-i8 recovery help

S

salimy21

Young grasshopper
Oct 28, 2017
76
1
hi
I tried to connect the ds-2cd2t42wd-i8 camera with uart and fix it, but it shows nothing on the console, where is the problem?
 
salimy21 said:
I tried to connect the ds-2cd2t42wd-i8 camera with uart and fix it, but it shows nothing on the console, where is the problem?
Click to expand...
Maybe the USB to serial TTL convertor isn't connected up correctly.
How does it compare with this :

Bricked 2CD2032-I no sadp

When upgrading my cam I bricked it, bricked it hard no mini system (even with the brick fix tool) can't upload FW with the hikvision tool. Nothing in SADP when I connect it I can ping 192.0.0.64 Two times then stops, it won't take the upgrade. it this trash or can I jtag it? I have 3 cams that...
ipcamtalk.com ipcamtalk.com
 
alastairstevenson said:
Maybe the USB to serial TTL convertor isn't connected up correctly.
How does it compare with this :

Bricked 2CD2032-I no sadp

When upgrading my cam I bricked it, bricked it hard no mini system (even with the brick fix tool) can't upload FW with the hikvision tool. Nothing in SADP when I connect it I can ping 192.0.0.64 Two times then stops, it won't take the upgrade. it this trash or can I jtag it? I have 3 cams that...
ipcamtalk.com ipcamtalk.com
Click to expand...
I'm sure the connection is correct but it does not work
 
It's rare that a serial console does not show anything, even on a bricked camera.
Can you show a picture of how you've connected the usb to serial TTL convertor, and what the signal definitions for its wires are?
 
You must log in or register to reply here.
Top Bottom