ds-2cd2t42wd-i8 recovery help
- Thread starter salimy21
- Start date
alastairstevenson
Staff member
Maybe the USB to serial TTL convertor isn't connected up correctly.
How does it compare with this :
Bricked 2CD2032-I no sadp
When upgrading my cam I bricked it, bricked it hard no mini system (even with the brick fix tool) can't upload FW with the hikvision tool. Nothing in SADP when I connect it I can ping 192.0.0.64 Two times then stops, it won't take the upgrade. it this trash or can I jtag it? I have 3 cams that...
I'm sure the connection is correct but it does not workMaybe the USB to serial TTL convertor isn't connected up correctly.
How does it compare with this :
Bricked 2CD2032-I no sadp
When upgrading my cam I bricked it, bricked it hard no mini system (even with the brick fix tool) can't upload FW with the hikvision tool. Nothing in SADP when I connect it I can ping 192.0.0.64 Two times then stops, it won't take the upgrade. it this trash or can I jtag it? I have 3 cams that...ipcamtalk.com
alastairstevenson
Staff member
It's rare that a serial console does not show anything, even on a bricked camera.
Can you show a picture of how you've connected the usb to serial TTL convertor, and what the signal definitions for its wires are?
Can you show a picture of how you've connected the usb to serial TTL convertor, and what the signal definitions for its wires are?