Hi all and hope i can resolve my problem
my setup is 4 x ds-2cd2032-i all Chinese imported to the uk with eng language v5.2.5 firmware on ds7604se/p nvr with a 3tb wd purple hdd
updated in the nvr on 1 ipcam to v5.3.0 from http://overseas.hikvision.com/en/download_89.html
after update got nothing from the cam in plug and play or manual
Could see it in tools sadp but it came up as 2xx minhostdll and a serial number and said firmware was 4.0 something
downloaded and ran tftp server and ran with digicap.dav v5.2.3 from hikvision eu portal says update completed but now can not see it in sadp
just tryed v5.2.5 too still same result
anyone have any thoughts or experience on this
Can only now communicate with the ipcam with ping & tftp on 192.0.0.64
my setup is 4 x ds-2cd2032-i all Chinese imported to the uk with eng language v5.2.5 firmware on ds7604se/p nvr with a 3tb wd purple hdd
updated in the nvr on 1 ipcam to v5.3.0 from http://overseas.hikvision.com/en/download_89.html
after update got nothing from the cam in plug and play or manual
Could see it in tools sadp but it came up as 2xx minhostdll and a serial number and said firmware was 4.0 something
downloaded and ran tftp server and ran with digicap.dav v5.2.3 from hikvision eu portal says update completed but now can not see it in sadp
just tryed v5.2.5 too still same result
anyone have any thoughts or experience on this
Can only now communicate with the ipcam with ping & tftp on 192.0.0.64
Last edited by a moderator: