Deleting/removing images on NVR

T

tate16t

Young grasshopper
Jul 18, 2015
94
9
I recently setup a DS-7608NI-E2/8P with motion detection. Is there a way to delete/remove images from disk after capturing them?
 
If you are looking to sanitise the disc for privacy reasons before getting rid of it - be aware that formatting it (or even managing to delete the files, which you can't do via the web GUI) will not wipe the data on the disc, just the file system references to it.
 
I would like to remove the images I create at some point since most are experimental as I become familiar with the product. Also going forward I would like to know how tomanage disk space.
 
tate16t said:
I would like to remove the images I create at some point since most are experimental as I become familiar with the product. Also going forward I would like to know how tomanage disk space.
Click to expand...
You should just let the NVR overwrite the data....there is no need to manually manage the space.
 
ok how does that work? At what frequency does it overwrite? If you could point me to the process I can read up on via the manual, providing its there of course :)
 
tate16t said:
ok how does that work? At what frequency does it overwrite? If you could point me to the process I can read up on via the manual, providing its there of course :)
Click to expand...
Someone with the NVR can point you to the settings...its should be something in the storage settings..usually "overwrite"...
It overwrites the oldest video as new video comes in.
 
It overwrites the oldest video as new video comes in.
Click to expand...
@fenderman is correct, given that 'Overwrite' is enabled when the disc becomes full.

Which, on the assumption your NVR has newish firmware (this is 3.3.4) can be found here:

attachment.php


On the older firmware, the tickbox to enable Overwriting is under 'Device parameters | Advanced'.
 

Attachments

  • NVR_41.jpg
    NVR_41.jpg
    43.4 KB · Views: 27
ok got it, thanks guys. I'm on V3.3.2 build 150522 so I guess I need to look into upgrading but I do have this option checked.
 
I have a US based unit. Are you referring to potential problems as it relates to the device regions or something else?
 
There have been posts about problems with email alerts on 3.3.4 for example.
And I suppose as you're already on a 3.3.x version you are already past the point where additional restrictions on different-region cameras were imposed.
And the fairly common consequence (admittedly mainly with cameras) of a firmware update exposing the true region of a device if the supplied firmware had been seller-modified to masquerade the region of the device.
 
Funny you mention email alert problems. I just went through a couple of days trying to get emails to work. I final did but cannot figure out what I did differently to get it working.
 
You must log in or register to reply here.
Top Bottom