Was going to post pictures with the post-install, but this mount deserves more sales---it's clearly better than the PFA137 and I'm sure this will be the default template for all of Dahua's mounts in the near future.
Mount appears solidly built, identical in size to the PFA137 mount (but can hold up more weight than the PFA137 mount according to Dahua's specifications)
However, what sets this mount apart is that it appears compatible with multiple Dahua models, not only the beloved 2MP Starlight Varifocal Turret. Apparently, it can work with the fixed-lens models as well.
However, keep in mind the IPC-HDW5231R-ZE and IPC-HDW5231R-Z perfectly complements this mount because it visually covers the screws (on the front cover) which secure to the back mount. Any smaller model than the varifocal turrets will expose the three fasteners as shown in one of the pictures below.
Intended for a more effective install against the elements (especially when it comes to water ingress)
The front cover doesn't fall off, it is kept attached to the mount through galvanized steel wire
Any camera which is compatible with PFA137 and PFA139 mounts will be compatible with this PFA130E mount. Varifocal Turrets will provide cleaner install with this mount, whereas fixed-lens Turrets will fit as well --- but, cover screws will be visible (as mount is bigger than fixed-lens turret itself). Boils down to personal preference and size of conduit as well as availability of other hardware being used. I'd personally prefer using this mount with the varifocal turret only.
NOTE: PFA137 AND PFA139 USES 1/2" KO'S WHEREAS PFA130E USES LARGER KO'S (Thanks to @awsum140 for pointing this out)
Cheers
@Arjun can share us some pics here for your installing with PFA130-E? Anyone can share the pics here for top 3 guys, i can send a free PFA130-E for him.