What firmware version does the cam have? Mine is below. Bost a screen shot of the Video tab like I did in post #16.
Blue Iris Trial?
- Thread starter Aronder
- Start date
Aronder
Young grasshopper
I'm setting and saving exactly as in the samplenhold screenshot above.
I found an article on Dahua cameras requiring ActiveX in IE11 so I double checked all related settings in IE11.
Still same problem.
I found an article on Dahua cameras requiring ActiveX in IE11 so I double checked all related settings in IE11.
Still same problem.
What happens when you hit save and then refresh?
Many of us will hit save 3 times and then refresh to ensure it took.
Or maybe you got a wonky firmware update and need to factory reset it 3 times.
Sounds crazy, but many of us have found 3 times as the magic number if something goes wonky.
Many of us will hit save 3 times and then refresh to ensure it took.
Or maybe you got a wonky firmware update and need to factory reset it 3 times.
Sounds crazy, but many of us have found 3 times as the magic number if something goes wonky.
Aronder
Young grasshopper
Device Type IPC-T2431T-AS-2.8mm
System Version V2.820.15OG000.0.R, Build Date: 2021-07-06
WEB Version V3.2.1.1067367
ONVIF Version 20.06(V2.9.1.1000915)
Aronder
Young grasshopper
Tried this too - same result.
Aronder
Young grasshopper
Aronder
Young grasshopper
Aronder
Young grasshopper
A manual check in the camera for a firmware update says 'it is the latest version'.
Aronder
Young grasshopper
If your IPC-T2431T-AS can support later firmware than mine can then might my camera be an earlier hardware version?
If the bitrate is too low, the quality of the camera suffers. If the bitrate is too high, then unnecessary disk space is used.
If your field of view results in an image that you find acceptable at that bitrate, then no big deal.
If your field of view results in an image that you find acceptable at that bitrate, then no big deal.
looney2ns
IPCT Contributor
You have a very old Operating system, hence you have a very old version of Internet Explorer on that system. Probably too old to work correctly with the cameras.
looney2ns
IPCT Contributor
That function does not work, it never has.
Aronder
Young grasshopper
I have IE11.
looney2ns
IPCT Contributor
And it's final release was 9 years ago, as I said, ancient.
Your firmware is newer than mine.
Maybe Andy ( @EMPIRETECANDY ) can link to the latest firmware.
You still have not posted a screen shot of the video tab as requested twice.
Where did you buy this camera from?
Is the bite rate changing even if you do not power the cam on and off?
Aronder
Young grasshopper
Here is the video tab image
Aronder
Young grasshopper
I put a Windows 10 system on the LAN with IE v21H1, made the recommended internet options security sites and ActiveX all enabled.
Didn't make any difference.
Aronder
Young grasshopper
Just tried that, typing it in. No change.