fps

  1. N

    Rotating image loses ~5FPS

    Hi all, New to this forum (and Blue Iris) but I'm getting the hang of it slowly... here's my scenario: I have a 4k (Annke C800 turret) camera that due to the area I'm looking to cover I'd like to rotate 90 degrees in BI. When I do, I lose about 5fps from the feed, which wouldn't be so bad if...
  2. vbhoj74

    Can my I-Series NVR record & playback at 60/50 FPS ?

    Hi, I've a very specific requirement for recording 4MP @ 50FPS and synchronous playback of upto 4 channels. I'll be using iDS-2CD7146G0-IZS camera, and I've been suggested DS-7608NI-I2 NVR by my local Hikvision rep. But I can only see the below specs under decoding of the NVR: Synchronous...
  3. Z

    "High" Frame Rate Camera

    Hi all, I'm looking for an IP cam that can do 60 fps (preferably even higher) at a resolution of 480p or higher. The reason I'm looking for higher fps instead of higher resolution is because I want to place them on a production line to record some moving parts 24/7. The recorded area is always...
  4. Shubham1520

    Nvr Settings for 8 1080p ip cameras

    Hey can someone tell me the best settings for ip cameras. I recently searched online but it is not working for me. The video is lagging a lot and is buffering. Ex- when a car goes by it just freezes es. I have done the following settings (photo attached). My internet speed is 250mbps. Please help!
  5. L

    Extremely slow live FPS

    I've read through similar threads and cannot figure out why my live video is so slow, 1 frame every 4 to 6 seconds. Things I've tried and system specs below- Turned off "Limit live preview" If I log into cameras through a browser the video is fine Re-watchings recorded video is fine FPS in BI...
  6. S

    Processor Recommendation for 8, 4mp (2688x1520) Cameras.

    I'm looking to replace my current cameras and add 4 more, so I'll need to upgrade my Blue Iris machine since it tops out at CPU usage a lot. Looking over at the wiki (Choosing Hardware for Blue Iris | IP Cam Talk), there are some great recommendations, but it doesn't really give any specifics...
  7. K

    FPS issues on 4k camera, laggy/dropped frames.

    Hey Folks, Really thankful for these forums, I've learned a lot by lurking but I have a problem I cant seem to crack. Problem looks like this: set up 4k camera, its getting around 13fps after a minute or so, it drops to around 4 FPS and starts to lag/jump (bursts of dropped frames) eventually...
  8. just some dude

    HDW5231R-Z max fps not available ????????

    I have 4 of IPC-HDW5231R-Z cameras, three installed thus far. I've noticed the available frame rates within Dahua camera setup for each one is different, in the drop down, one goes all the way to 60 FPS, one goes up to 50 FPS and the other one only goes to 25 FPS. Doesn't seem to matter that...
  9. J

    FPS Drop on Trigger - Possible fix.

    So I've been doing lots of research on the fps dropping in BI when it gets triggered. My cameras would go down to anywhere from 10-0 fps. This would last about 10 seconds and I had no idea why. Spent lots of time in perfmon, and I had recently used a "CPU Unparker" for my gaming rig. What it...
  10. W

    Hikvision HD stream

    Hi guys, I was wondering if there is a way to have a stream that is in HD and that have a high FPS. I am trying to record my camera in Blue Iris and I can't get a clear and real time image. If the quality is high, the FPS is low and vice versa. My camera is an Hikvision DS-2CD2132-I. Thanks !
  11. Chust

    Change frame rate at a specific time in bi?

    I use d2d for recording. During the day I set my cams to 15fps in the camera software. I set bi recording fps to 20 due to blur/streaking/pausing if set to 15fps... Now at night the cams switch to 7.5fps in the cameras software. I set bi recording fps to 10 due to blur/streaking/pausing...
  12. R

    Camera Properties> General > Status > How to correct my FRame Rate "yellow sign"

    I read at HELP: The frame rate and bit rate values represent what is currently being received from the camera. What and where i need to change this in order to correct the warning? At the original camera settings, do I increase from 10 fps to 20 fps in order to match? Would it affect my quality...
  13. N

    UscreenCapture Filter w/ Blue Iris - max'd out framerate

    So I've been using UscreenCapture Filter as a camera to monitor my system remotely via Resource Monitor, this seemed to work great in 32 bit, and once I switched to 64 bit, it also seemed to work. I have Blue Iris set to capture 2 FPS and 'automatically adjust' for FPS unchecked, and I have the...
  14. C

    FPS / Bitrate Etc...

    On to other settings now on my camera journey Using Blue Iris should I set the FPS in the camera or in Blue Iris software, or both. I figure after testing and playing with my HD H.264 cameras a good FPS will be between 7 and 15 FPS Now that leeds to next 2 questions on Bitrate setting, a...
Top