Search results

  1. A

    How to change nvr unlock pattern?

    I might finish up doing that. It drive me barmy. I can't figure out how it works. It has sat there for about five years and all we do i check the recorded movement stuff when there seems a need. Caught a car thief that way. But if I ever knew how to set up cameras on it - and I must have...
  2. A

    How to change nvr unlock pattern?

    Years ago I bought an unbranded nvr from you to go with my recently purchased dahua cameras. It always comes up with an 'unlock pattern' where we have to draw a continuous line through an array of 9 buttons. I have forgotten the pattern. I can get into it via the onscreen keyboard on usb...
  3. A

    How to power dahua IPC HFW 5431 EP-Z ?

    Ho ho ho.... relax everyone... it IS working ! I just clicked where it should be in the smart pss screen a few times and got messages flashing up and going away saying 'this video is being requested' and then suddenly gawdamn if it didn't start streaming... so it's a goer. beautiful. I...
  4. A

    How to power dahua IPC HFW 5431 EP-Z ?

    what's the point of using 2A if it 'needs' PoE ? are you saying it CAN use the power line if we give enough power? I just gave it plenty of power. 12V with 5A available. It's not interested. I very vaguely remember reading something interesting all those years ago about that 12v line...
  5. A

    How to power dahua IPC HFW 5431 EP-Z ?

    the setup is now: camera > ethernet line (a PoE line) > EoP adapter > house wiring > Eop adapter > ethernet line > nvr which can't work because it leaves the camera unpowered. what was working well before was: house wiring > EoP adapter > ethernet > nvr > ethernet PoE >...
  6. A

    How to power dahua IPC HFW 5431 EP-Z ?

    by didn't work I meant it doesn't show on smartPSS-lite. which it did until i did what I've just done. the power supply is marked 12v 1.5A pos centre the cam says 12v 1A/poe are you saying you can confirm that's power it and it should work? I have the thing outside. it used to be inside. to...
  7. A

    How to power dahua IPC HFW 5431 EP-Z ?

    Yep, it's PoE. But if you've got no PoE and it's going to be two weeks before a PoE injector arrives in the mail what can I do? Why do I ask? Because it has a tail marked 'power'. I assume that's power in? Hope so. I stuck 12v on it and it didn't work. Hope it didn't break it. Why would a...
    • abrogard
    • Thread
    • dahua ipc hfw 5431
    • Replies: 8
    • Forum: Dahua
  8. A

    How to rescue my HFW1320 ? Lost pswd/username

    Most I've ever been able to find I think is that which I just got now from it's 'web service': Device Type: NVR Record Channel: 4 SN: 3JPAZ9EF505A730 Web Version: 3.2.3.84176 Onvif Client Version: 2.4.1 System Version: 3.215.0000000.0, Build Date: 2017-08-07 Pretty ancient there, eh...
  9. A

    How to rescue my HFW1320 ? Lost pswd/username

    yep. that's the one. pull the thing apart and short 1 and 2. sounds a bit hard and problematic to me. I can see the camera, get its feed, with smart pss lite. it does that somehow. I don't know how. got the details from the nvr I suppose. for years it was connected to the nvr. but i can't...
  10. A

    How to rescue my HFW1320 ? Lost pswd/username

    I just got smart and shifted my ethernet wiree Dahua cam outside and moved the lower res Dahua wifi cam inside. Which meant disconnecting. The ethernet wired cam is working fine. The wifi cam I cannot access. The nvr will not communicate with it without the username password. I've no idea and...
  11. A

    What is a decent IP cam for my budget?

    Yep. thanks for all that. :) p.s. So what would you advocate - a system centred on a pc or a system centred on an NVR?
  12. A

    What is a decent IP cam for my budget?

    Well thanks for that - it's news to me about the ability of pc's to run 24/7/52. I've lost two Asus motherboards due to fan failure - onboard fans they were. To be fair the Asus software notified me they were on the way out and I didn't react quick enough. And I've had another two at least...
  13. A

    What is a decent IP cam for my budget?

    HI. I don't know about push notifications. I haven't got a smart phone. Well I do but I never use it. I find I've got two Foscams still running. Spotted another one here today. Just saying. Also got 3 that died. :) Big thing is storage I think. No matter what the cameras see or how well...
  14. A

    What is a decent IP cam for my budget?

    No mention here of Ispy. It's a free Blue Iris. I was able to get connections via Ispy when my Blue Iris wouldn't make one. And Contacam. I used for a long time. I could make connections with it that Blue Iris and Ispy wouldn' t make. I actually had more pleasure and smooth ability with...
  15. A

    Can You See Grid Connect Cams Across the Web?

    We have a very cheap 'Orion' IP cam that uses Grid Connect and our home Wifi Lan. Works fine. Good picture. sound a bit horrible though. But that's okay. The thing is we'd want to see it from outside the home. The instruction thing doesn't give this a mention. The box says 'See and speak...
  16. A

    These Bunnings Orion Things Alright?

    oh yes, I finally woke up. adapts the 3 pin power to a usb socket things can plug into instead of into a computer? yep. can do that. Actually already got a cam doing that. I just go brain dead sometimes. :)
  17. A

    These Bunnings Orion Things Alright?

    oh. okay. I guess like you say at that price I ought to give it a go. Have you got any knowledge of that power input question I raised?
  18. A

    These Bunnings Orion Things Alright?

    so 1080 isn't good enough, basically?
  19. A

    These Bunnings Orion Things Alright?

    Are these things okay? What about the power? It seems to be saying it is supplied with power via a USB cable which can be plugged into any type A port. So that means it has to be powered from your computer? Or I have to find a power supply - a wallwart - that has a usb socket? That's not...
  20. A

    Can We Move Through Recorded Videos with One Keypress?

    The only way I can find to view my recorded videos (motion captured) is to close down the last one, click on the next one. I'd like to be able to use the left and right arrows keys, for instance, to run through the them and stop at one I want to see. Does it offer that functionality anywhere?
  21. A

    I Need Help With Ispy, Please. :)

    Thank you for that. Got rid of it. It wasn't listed in services but I couldn't delete the files and I found it was listed in Task Manager as a couple of background processes. Stopped them and got it out. Excellent. :)
  22. A

    I Need Help With Ispy, Please. :)

    I have two Onvif Wifi Sricams. One of them is seen by my Ispy installation on one of my computers. The other one is seen by nothing and I am trying to set up Ispy on a second computer and use it to see it. But I got sidetracked by the advertising and installed this Agent thing instead and...
  23. A

    How To Know IP of Cameras Installed on iSpy?

    It begins to look to me like the way it works is they have a central place that all involved cameras log in to. We log out cameras into it via the ispy software. then to connect remotely we do that again somehow. I can't find out how. They don't say. But probably by loading this software...
  24. A

    How To Know IP of Cameras Installed on iSpy?

    no problem. I am familiar with port forwarding. the thing I'm after now is just what URL to put into a remote pc to view my cameras here. ispy doesn't say. I see ispy when setting up my account forwarded 63348 so I tried myip:63348 but it couldn't connect. ispy also says its software is...
  25. A

    How To Know IP of Cameras Installed on iSpy?

    very succinct. and very helpful. thank you very much for that. can you help with another one? how do I access these camera from afar - from a different pc in a different town? Given I have a fixed IP here and have port forwarding. Sricam say it cannot be done except with their smartphone...
  26. A

    How to access remote Onvif camera with iSpy?

    What's the URL to access a remote Onvif camera from iSpy and how must the port be forwarded on the lan where the camera is?
  27. A

    How To Know IP of Cameras Installed on iSpy?

    iSpy doesn't display the IP information of the cameras installed on it. I look at the streamed image and right click for edit details but there's nowhere I can see what the config of that particular camera is: IP and port and whatever... but especially simply the IP. Is there some way to do...
  28. A

    Any Help/Manual/Replacement For My NVR?

    I have this anonymous NVR I got a couple or more years ago. I never learned how to use it really. It has been sitting there saving the output from a wired in Dahua. I could never get it to see my wifi Dahau, nor any of my other cameras. Seems to me it won't see anything except what is...
  29. A

    How Can I Make A Wi-Fi Cam Appear on Wifi When It Only Appears When Wired?

    'solve' the same thing.
  30. A

    What Else Can See What Ispy Can See?

    I just got two wifi sricams up and running. Thanks to a lot of help. But now I can see both of them in iSpy. But I also have Contacam, Blue Iris, Sricam's own CMS and Onvif device manager - none of which can see the cameras. And iSpy doesn't help by not allowing us to see the configuration...
Top Bottom