Search results

An example of bp2008's point when using AI to enhance footage: Using the wheel as an example you can see why accuracy will be called into question.

Yes, you can view recorded footage from the NVR via ISAPI for a certain time period. With some testing and effort probably a picture too provided the image was part of a triggered event. Going the ISAPI route might be reinventing the wheel in a sense when you have the ability via the webGUI or...

Yes, it will record all 8 streams at 4K. My understanding is decoding refers to the NVRs playback limit and does not affect recording.

Just to clarify, does the HDD Status report as Normal? HDD Full set to Overwrite? General is ticked and Scheduled 24/7?

Try the following: Disconnect the Ethernet connector at the pigtail. Check for moisture/debris and make sure you hear a click when reconnecting it. If you are using a PoE injector, disconnect the Ethernet cable and make sure it's seated correctly when you reconnect it. Check if the problem is...

It's possible, check the logs:

Check authentication is set to digest/basic here: And here:

I don't see a reference to the Test feature in the documentation. Might be a patrol, pattern or preset that is scheduled. Are you able to access the webGUI of the camera?

This works for me using Talend API tester (similar to POSTMAN) in Chrome: Method POST http://admin:yourPassword@192.168.1.xx/ISAPI/Traffic/channels/1/vehicleDetect/plates Body: <AfterTime> <picTime>2020-03-07T21:00:00Z</picTime> </AfterTime> Result:

We have a confirmed case in South Africa. Won't be long before it's in my neck of the woods. Cape Town has one major public hospital and less than a handful of smaller, ill-equipped hospitals servicing more than 4.5 million people. When Black Friday became a 'thing' in South Africa around 2016...

Via Talend/curl/Postman, Amend the following to your admin credentials and camera IP. To switch off IR feature entirely: PUT http://admin:yourPassword@192.168.1.xx/ISAPI/System/Hardware Body: <IrLightSwitch> <mode>close</mode> </IrLightSwitch> To switch on IR: PUT...

As you mentioned, do you really need this struggle? WiFi cameras come with baggage, spare yourself the support headaches and run Ethernet cables. We had a similar situation were the client refused external runs and the crawl space in the roof was 3 feet at the highest point then tapered toward...

To narrow down the issue - What firmware are they on? Are the notifications via email, Hikconnect app or third-party software? Which browser are you using to configure the settings?

Those bright orbs are usually bugs attracted to the IR lights. Camera models? A post of the detection area and motion settings from the webGUI would help too.

Is there any branding on the cameras?

Via the camera's webGUI, go to Configuration>Network>Advanced Settings>Integration Protocol. Enable CGI and set authentication to digest/basic. For ISAPI, enable ONVIF and create a user with the same credentials as the admin login.

You most likely need to enable ISAPI on the camera via the webGUI and create a user account to access the RTSP stream. Have you tried admin/123456 or admin/12345678 as the default logins? Is there a reset button next to the Ethernet plug?

If you can provide a rough diagram of the buildings layout at location A and location B it would help drafting a proposal. 30 cameras should be manageable with the right wireless kit and NVR. The cellular network should be fine for remote viewing, alerts and event playback if configured correctly.

It can be done by via ISAPI after enabling the common gateway interface (CGI) protocol on the camera. Using curl or a HTTP request the ircutFilter can be manually set. Are you developing an app or would controlling the setting via your browser be sufficient?

iVMS-4200's storage server would not be my recommendation for a PC based recorder. If you haven't already, check out Blue Iris. Its superior on many levels. In my experience the storage server components do not always start on reboot. Windows updates, especially Windows 10, occasionally mess...

Any thoughts on the rush for an effective treatment? Reports of anti-HIV drugs like Kaletra and antimalarial drugs like Chloroquine to treat COVID-19 are surfacing. Layman logic perhaps but if COVID-19 responds to antiviral drugs, could they reduce the viral load to undetectable levels resulting...

I had not heard of ZeroHedge prior to this thread. Am I wrong in saying it's a news agregator? Lol at Tyler Durden, fight club reference I assume. What really broadsided me was the comments. Wow, no idea what to make of it.

Our LPR camera is a 2MP set to 15fps. It aggregates multiple frames in the detection area to accurately register the plate. Many of our entry level cameras are able to display the plates of passing cars so I'm wondering if the issue is not codec/frame rate related. What are your Annke "4k" settings?

I tried on my PC, loading SADP first then iVMS - iVMS then SADP, both devices detected with no errors regardless of the load order. Must be a bug in Hik's Mac version of their software. Interesting though, when SADP was running iVMS would not auto-login, it wanted me to manually enter the...

Hikvision sales are a sizable portion of our business. I contacted my distributors today and a couple of them expressed concern about replenishment of stock. Hikvision has factories/offices in Zhejiang and Hubei provinces, both are on lock down due to COVID-19. No doubt the virus will have an...

Provided you can connect locally to the client's LAN, you could try the following. Install Hikvision's SADP tool onto your laptop. Connect to the client' s LAN and run the tool. If SADP discovers some of the devices we can try the next step. In the example below, the info listed in the Software...

If the client(s) have agreed to you taking over the camera/NVR management contract, what reason does the previous provider give that justifies withholding the credentials? If they outright refuse to help, there may be work-arounds but they often come with a lot of ‘ifs’.

We setup up something similar at a few client sites. We created a L2TP/IPsec VPN using Mikrotik routers. Client sites connect to a dedicated IP on our side allowing us direct access to the camera networks. Our mobile devices are able to connect to the VPN and manage the NVR/Cameras/Routers but...

How was the device initially activated? Did you use SADP or via the webGUI? What is the device?