Search results

I guess that firmware is a custom specific release, normal releases are using zeros at the position of "1CKA" , see custom firmware screenshot below Maybe you found the "jackpot" firmware where they fixed the IVS push? It seems you are the only one with a 4.002.xxxxxx firmware that has IVS...

@Bumworms I have reacted in this tread , i also did not get the push notifications from IVS. In my setup I do not use P2P and added my NVR as a local IP to DMSS. So still using one of the first V4 firmware release and I do receive all MD and AI events as a push message on my phone ( if enabled...

Will send you a PM with the specific firmware because it is not available on the internet.

To make a summarization of the confusion that is created by Dahau to use the same type number DH-SD22204T-GN for units that have different hardware revision, in this case the size of eeproms to store the firmware. As mention by @Dave Lonsdale and @TVT73 So cameras made before 2017-2 will have...

Alright, could you tell me already what the file size of that firmware (****.bin) file is?

Could you sent me the firmware file as well, i am curios if this is a version that does work on my old camera. Thx.

@xxxlolo Can you check for a setting called "disarming": Disarming should be disabled, For the push notification, Mobile Push Notifications should be enabled. Screens can look different on your firmware version , but just check for the main items.

@xxxlolo See this tread for same issue. Try to use a firmware version V4.001.xxxx !

@CameraYager What browser do you use? Can you use IE11 browser or Pale Moon 32bit, see this topic/post.

@Pavel-V When running PSS ( same version) with only 5 devices configured and no Live views , it uses almost the same amount of data as in your situation: So probably as designed......

@Domparisi I have encountered the same issue on the NVR4216-I when installing the latest firmware DH_NVR4XXX-I_MultiLang_V4.002.0000000.1.R.220211. No IVS notification on DMSS App anymore! Went one version back to DH_NVR4XXX-I_MultiLang_V4.002.0000000.0.R.210811 , also no IVS notifications...

@EMPIRETECANDY Thank you for your feedback. For the P2P function, it will be set back to enabled every time you will do a reboot (also a scheduled reboot), it is not related to set settings to "default" or "factory default".H Sorry , will verify again. For now it seems to work correctly...

@EMPIRETECANDY Some questions about the new firmware "empiretech-5442-smart-ir-general_ipc-hx5xxx-volt_multilang_np_stream3_v2-840-15og008-0-r-220218-bin": 1. Is this security issue also resolved in this firmware ? 2. Do you need to perform a factory reset after installing this firmware ? 3...

@Cctvrole Did you test your speaker with open input, the plug not connected, or already connected to your nvr? What if you short the input , so directly connect the yellow and white wire together, is the hum then less or gone? If not, then the power supply used, is not clean enough on the...

What is the type number of the camera? Does it have external alarm wires that are making a short? Did you already pressed the reset button for at least 10sec?

@HelpMe3 Do you make use of the internal SD card for recordings, maybe the SD card is broken? Did you already try to set the camera back to factory defaults and then reconfigure it?

@istyle0978 Alright , with the information you provided I thought you where pointing to the general function of selecting presets of a PTZ Cam. I don't have any "auto track" capable PTZ nor do I have any experience with the "auto tracking" functionality, so can not comment on its behavior in DMSS.

@istyle0978 Just verified in DMSS if I can change to my predefined presets of a PTZ with a little help from this video. It is not the easiest way of changing preset's , but it does work.

@bertnl I have enabled the email functionality on one camera for some tripwire/intrusions and noticed that in some cases I also don't receive a start Email with a snapshot, only the End email. Can the email function or AI function not keep up with all the triggered events? To see if AI does...

@bertnl That is a good question , never checked this behavior for the email function with snapshot. I expect that for every triggered tripwire, an email will be send (2 emails total per event: the trigger and End mail). If a snapshot is or will be attached to an email could be depending on NVR...

@bertnl As far as I know, an email will be sent when an "alarm event" starts and when the "alarm event" stopped ( End). So yes for every event, 2 emails will be send. In the email message, you will see what kind of alarm event has been triggered (Tripwire , Intrusion , Face Detection , Motion...

@bertnl Indeed , the settings are correct. - I have only one clue left: Is "Disarming" in ALARM disabled in the NVR?

@bertnl So you receive a test email when pressing "TEST" in your NVR? - Then did you enable the email function ,if not you are still able to send a test email but the email functionality is not enabled! - Enable also the "send email" function in the IVS setup in your NVR. That should be...

@bertnl Goedeavond After reading the posts, can you check the following: At the moment , do you have the "send email" option active in both the camera and NVR ? What if you deselect this option in the camera and have it only enabled in the NVR for the correct camera?

@lemmcgrath From the information you shared , I would say there is nothing wrong with the connection. The camera has power and it communicates with the ipconfig tool, otherwise you would not see it. Can you provide more information on how you connect your camera ( NVR PoE ...) and what you mean...

hi @dcmkii Are you using Google Chrome browser when trying to connect? Try an other browser, see if that works? Update: Seems you nailed it down to the correct root cause , indeed port 10080 is blocked by web browser ! Did a verification. Edge: Firefox: Chrome: I tried then Pale moon...

Hi @dcmkii , You mentioned : "I just rebooted my NVR and the funny thing is that the last camera on my list is now assigned with the 192.168.0.20:10080". Is it then possible for you to access that camera on 192.168.0.20:10080? If so , then there is no problem with port 10080, the ports are then...

Hi @dcmkii Well, that behavior on a NVR with PoE seems normal. When ever you connect a camera to one of the NVR PoE ports it will assign automatically an internal IP address. The link of the IE icon is then generated automatically by the NVR in a format: "NVR-IP":"port#" ( port number from...

Hi @dcmkii Seems I overlooked you are using an NVR with PoE and your NVR uses internal 192.168.1.XX range for the connected cameras. Your NVR can be reached on 192.168.0.20 on your LAN ( typing error (192.179.0.20 is my nvr log in address) ??) To connect to your camera's , clicking on the IE...

You mentioned that the issue started when you did change your modem/router. So the question is , do you know what was the DCHP ip range of your old modem/router? Was it 192.168.0.1 - 192.168.0.254 ?? In the screen shot you posted , it looks your new modem/router uses a DHCP ip range of...