Search results

  1. M

    Can PTZ stay at preset until no motion ?

    Hi all, Been asked if BI can do the following, and if so how. PTZ over looking yard with 2 zones set, 1 on gate A, and the other on gate B. He has set it up with alerts so as when motion is detected at one of the gates the camera goes to that preset for that gate and then returns to home...
  2. M

    Trigger now only works in settings

    Hi all, I have a static camera to control a ptz camera, I have set up the triggers and alerts and tested in the alerts section and all works. But if I try it from the desktop camera by right click/trigger now, or the icon at the top, nothing happens. It used to work fine from them. It still...
  3. M

    I am looking for a firmware flashed

    Anyone had any luck with this cam ?
  4. M

    No signal image, but stream receiving

    It's the bloody gremlins.
  5. M

    No signal image, but stream receiving

    Generic did not work. So I decided to do a reboot of pc again, already done this a few times with no luck, BUT this time for some reason the screen has gone back to normal and I can now see the view. Thanks for your time in trying to solve this with me. Do have another question, but will...
  6. M

    No signal image, but stream receiving

    Just tried the hardware decode to NO, still the same. Last update version 5.3.7.12 x64
  7. M

    No signal image, but stream receiving

    I have an ip cam connected and has been working fine until about 2 weeks ago. The camera is located at work, and has been connected at home by a DDNS address. But now I only get a "no signal" screen, and in the camera general tab it says I am receiving a 2.1Mp, 1.51fps stream. I have rebooted...
  8. M

    Calendar just blank white square

    Went to use the calendar the other day and it only shows a blank white square. Never used to, it used to work. I can't do anything while this is showing, I have to wait till windows says its not responding and have to click end task button. Any ideas PS: This pc is just running BI.
  9. M

    Jennov 1080P 30X PTZ Camera

    Thats what I did, and BI filled in the make and model, it's just that I cant get the zoom or IR lights to work.
  10. M

    Jennov 1080P 30X PTZ Camera

    I have a Jennov 1080P 30X PTZ camera and if I get BI to turn of the IR in the alerts it stays on, BUT the picture at night will go to colour as there at bright street lights. Also I cant get the zoom or speed to work. Is there a way to get the PTZ commands from the camera ?. Or do I just keep...
  11. M

    Alerts not showing in UI3

    SORTED I deleted the camera and reinstalled it. All is working now. Thanks for the info.
  12. M

    Alerts not showing in UI3

    Have checked that, and I am logging in as an admin, and the view recordings is ticked. I have noticed that it records to the NEW folder as do all the other cameras. And on the main pc with BI installed it shows up with the others on ALL, but that camera does not show any recordings in ALERT...
  13. M

    Alerts not showing in UI3

    Thanks
  14. M

    Presets keep stopping to work

    Hi all, I have 5 presets setup in the camera, and have matched them up in BI, it works great moving to presets when triggered by another camera, but after a couple of weeks BI losses the presets and it stops working. They are still set in the camera and working, but I can't get them to work in...
  15. M

    Alerts not showing in UI3

    I have checked and no cameras are in a group, the filter is is on all, and even when filtered to this PTZ cam it shows nothing in the alerts.
  16. M

    Alerts not showing in UI3

    Hi all, I have added a new camera and all is working, until I go to look on UI3 web page or mobile app, and non of the alerts are showing up, if I look on the server they are showing. I can see live video on both but alert icons are missing. Am I missing a setting somewhere to allow them to...
  17. M

    How to delete group names

    Yes I saw that, but did not see it mention that none highlighted would remove it, well not in the part I was reading.
  18. M

    How to delete group names

    Thanks for that, wish it explained that in the manual, could have saved me a couple of hours.
  19. M

    How to delete group names

    Hi all, I have added some group names while testing, but now I seem to be unable to delete them. I have checked all the cameras but I can only untick anywhere group is named.
  20. M

    Clip Archive not showing up on calendar

    I am having the same problem, no clips showing. I ha tried rebuild and repair, on repair I get "error encounted 00000070"
  21. M

    Auto touring IP dome camera recommendations required

    Thanks for that
  22. M

    Auto touring IP dome camera recommendations required

    Hi all, I have been asked to find a auto touring mini ptz dome camera here in the UK. He wants it to travel between 4 presets pausing between each preset. I think I found one Dahua DH-SD1A203T-GN from reading on here in a question, but to order this it will not arrive here until mid December...
  23. M

    Double click open another camera

    5.0.0.66
  24. M

    Double click open another camera

    Hi all, Did a clean install of windows 10 and BI yesterday, it's all up and running :) . I have changed the camera layout to suit me. But I have noticed that if I double click on a camera to full screen it, nothing happens, but then when I next single click on any another camera THAT ONE goes...
  25. M

    Can't get BI5 install to start

    Think I will take "STEP 0" as I have done all the others.
  26. M

    Can't get BI5 install to start

    Hi all, I have BI4 installed (windows 10) and trying to install BI5. I have double clicked the file, and right clicked and selected "run as administrator" but nothing happens after the screen allowing it to make changes to indicate it is doing anything. I have disabled Kaspersky and...
  27. M

    Trouble connecting to DVR

    Sorry, It's a TYT Full HD 8 Channel Real Time Pro XVR 2HDD. Supports TVI, AHD, IP & Analogue. This is it HERE
  28. M

    Trouble connecting to DVR

    Hi all, I have installed a new DVR, it's ports are as follows: IP: 192.168.1.83 HTTP: 1200 HTTPS: 443 Server Port: 6036 RTSP: 554 I am having trouble connecting to it via BI, the web client built in it works over the net at home, and I can connect to it via a mobile app. I have setup BI with...
  29. M

    Blue Iris as client only

    Sorry, but could not find the UI thread at first.
  30. M

    Blue Iris as client only

    Yes
Top Bottom