Recent content by rmw85

Well after some more detail testing. It appears I set the IP cameras addresses then connected them to the NVR. I then must of tried the plug and play first as all my settings i had set changed and i later tried to set the NVR to use the IP addresses i originally wanted and had no luck. I set...

Yes. I believe so. I usually work home networks on the 192.168.1.XXX range. And change any defaults that are not. That will be something i will check into again when i get at the device here soon.

I thought i changed it to 192.168.1.1 with 255.255.255.255 but i will have to double check. I've been messing with the NVR through the actual box and not the Web Gui so that might lie some of my issues as well. Going to bring more gear to setup to a network to mess with it might save me some...

The cameras are plugged into the NVR's built in POE switch. The settings i have mess with are as follow 192.168.1.111 then 112...115...116. The Protocol i tried both ONVIF and Hikivision as suggested in this post with ports 80,8080,8000. Using the correct username and passwords. I have sent an...

Is it so hard to ask a question and get some help from fellow users? Does egos need to be involved to have a pissing match on who has the better opinion in a post that isn't relevant? Or am i missing something? Do you have any suggestions as to what the problem might be sans that i bought "crap"?

I dont know what debate was worse this post or the presidential one? Please just delete this post ill eventually figure it out without everyone getting butthurt...

Is cali ever not on fire?

Alright lets shake dicks and stop this pissing contest. I set it to Hikvision protocols and 8000, onvif 80 and 8080 and one camera worked with hikvision. Which 4 are identical which is confusing. I'm going to try and double check camera settings themselves. All i did on them was change the IP...

Fenderman. $600 Budget 6 cameras. How would you go about installing it on a Mobile Home?

YES! That is what the current ones i purchased are that i'm having issues with. The ones i have at home is the one i posed above. So hikvision protocol 8000 port? Thanks for the help! Will report back later tonight

It does not look like this.

It looks closer to that from what i can tell from google search. I don't have any hikvision cams. Its not like my Cantonk cameras that have the Boxes at the bottom and right side you click. (Which i think you have cams like) I will have to try again today. I'm sure i'm missing something stupid.

I changed it to manual. I changed the IP address to be different. Made sure the was same network as the NVR. I set it to ONVIF and put in the username and password. Ive been trying to set it up from the NVR itself not through a web browser. There is a 2MP limit and the cameras are 2MP. I have a...

I purchased the following NVR to go with some Cantonk cams and having the hardest time getting them to work. Anyone have any suggestions? http://www.hikvision.com/en/Products_accessries_433_i5420.html Makes me love my Blue Iris setup even more!!!! But for nontech people its probably too much.

Looks like you found Bruce....