Recent content by lanep82

Here is another few screenshots using internet explorer. One is just going to my http://xx.xxx.xxx.xxx:1051 where the X's represent the IP address of my server.. The 2nd is using http://xx.xxx.xxx.xxx:1051/ui2.htm I hope this helps with your diagnosis. I tried using your new login and...

To my knowledge, you can really only change your IP camera settings through the actual camera setup within your network. it will be something like http://192.168.1.xxx:port I used an app called 'fing' on my iphone to detect what devices are connected to my network and then I go to internet...

I didn't follow the BI Tools instructions exactly. Chrome: I was just going to http://IP:Port/ like normal on chrome for my BI webserver. I looked at your instructions and I finally went to http://IP:Port/ui2.htm and got it working while using google chrome. INternet Explorer: The internet...

Thank you for your help. Google Chrome: I tried using google chrome but when I replay clips, i don't see any fast forward or rewind buttons on the screen like I do in IE. I also tried installing activeX controls but it kept telling me "please use JAVA page for this browser". below are a few...

Hello and good morning. I recently (yesterday) upgraded my BlueIris to the latest version (4.3.7.1). When I got to my office this AM, where I usually remote into the webserver for camera viewing, I couldn't log into my BlueIris Webserver from ONE of my TWO PCs. The PC (laptop with IE 11) that...

WHat sort of MoBo do you have? I would assume that if the onboard graphics are decent, and you don't need your PC for gaming, etc, that I wouldn't spend the extra $ for a Video Card

This worked great. I rolled back and everything went back to normal. Thank you for the link.

Keep us posted please!~ This is driving me crazy. In the meantime, if anyone has a direct link to the 4.3.2.1 version, I would greatly appreciate it. Not only are my reolink cams running at 4 FPS, it is also bogging down my i7 to about 90% usage (compared to 30%). I disable the reolink cams...

How did you revert back to 4.3.2.1?? I really want to do that because this new version is what seemed to start causing all of my probs. THe RSTP timestamp thing was already disabled for me on all my Reolink cams, due to reading that on a dif thread here. The hardware acceleration was globally...

Hello and good afternoon. I am currently running 4 Hikvision, 5 Reolink, and 3 Amcrest Cameras on my Intel Core i7 / 16 GB machine. Up until the last few BI updates, I have had little to no problem with the cameras, except for the Reolink ones. My latest issues, after the update to BI 4.3.3...

I basically started from scratch and it seems to be working ok now. just clear the motion trigger areas and fill them in again. This time, however, you will want to mark the areas that you WANT triggering to take place. Anything that is clear/not green will be outside the triggering area.

Ok, JUST to confirm.... in order to set up the triggers correctly in the latest update, 4.3.0.6 x 64, the green highlighted areas are the areas that will trigger when movement appears and the non-green areas are the blocked areas. IE. when movement occurs in the non-green areas, a trigger...