Recent content by GeoffColl

  1. G

    AI or Dahua IVS

    Do you let BI sort motion capture; or leave it to individual camera IVS and set BI to receive ONVIF events? I have 'played' around with the options in the past and decided that just using BI resulted in an increase in computer CPU/RAM. It seems I might be doing both - AI on 'continuous' -, but...
  2. G

    Trouble with new DS-2CD3B86G2T-IZHSY -missing part of menu

    I have an old machine connected to a seismometer, no reason to upgrade to anything else. Mind it didn't 'cure' my issue with one of the cams......
  3. G

    Trouble with new DS-2CD3B86G2T-IZHSY -missing part of menu

    Have used a PC running Win 7 to make and check my settings.... Easy way out!
  4. G

    Trouble with new DS-2CD3B86G2T-IZHSY -missing part of menu

    Just looked at the registry on my Win10 - HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft exists this far, but no entry for Internet Explorer...
  5. G

    Blue Iris and CodeProject.AI ALPR

    I've just started to use this, and am generally happy to continue to do so - need more experimenting though. The CPU usage now hovers around 10-15% instead of 0-3% which I can live with. One annoying issue is the full screen live view has become remarkably "stuttery" - even on main stream at...
  6. G

    Trouble with new DS-2CD3B86G2T-IZHSY -missing part of menu

    Indeed - it didn't work for the change I tried to make this morning. The cam continues to react but not trigger through to BI.
  7. G

    Trouble with new DS-2CD3B86G2T-IZHSY -missing part of menu

    Looking in Edge >> "settings" >> "default browser" >> add cams, by URL, under "Internet Explorer mode pages". Seems to work - though I might be mislead. I'll find out soon when one of my mis-functioning camera triggers again - I had it not to record out!!!!
  8. G

    The Importance & My Recommended Usage of I-Frame, CBR vs VBR, Shutter Speed In Your Configurations

    Thanks. Very informative, though a little over my head. I was hoping there'd be a glimmer of explanation in settings as to why one of my Dahua cams will trigger but won't PTZ (though in a wildlife position - not Human/Vehicle). I had a heron walk upto it and fill almost 60% of the image - but...
  9. G

    SD49225XA-HNR

    One is back out working. The attached photo was taken last night - zoomed to around 10 metres. The second 225 still in ITC, it'll work but only with an external power supply - debating whether to swap out the rj45 connector.
  10. G

    Connection issue

    What can I say - I don't read widely enough- I was obviously just lucky in choice with the first 100metres - CCA elsewhere on much shorter runs (<50M) didn't alert me ...... At least the replacement is advertised as solid copper (in capital letters) and 23awg.... Will test it out with the cam...
  11. G

    Connection issue

    Sadly CCA, 24awg - but another 225 works well at 105 metres - probably not good enough for the 425. The other at 105metres is on solid copper 24awg - not too sure why I didn't repeat that order!
  12. G

    Connection issue

    The 225, whether at 100, 18 or 2 metres always shorts out equivalent to the end of the cable. It'll work with direct 12V power.
  13. G

    Connection issue

    The 425 is showing on the network router, even at 100 metres. The web page is accessible at 2 and 18 metres - but 100 metres it's not.
  14. G

    Connection issue

    That's what I intend to do this morning, after I get the new 425 back to factory reset so I can access the gui. (This 225 was originally on a 15 metre cable until it malfunctioned).
  15. G

    Connection issue

    The switch is an at, providing max 30W per port.
See more
Top Bottom