Recent content by bignose3

  1. bignose3

    landscape, camera per page, Why not six (6 cameras) !

    Hi, Samsung SGS21 & other android tablets. New to TinyCam, always liked it but to be honest IpCamViewer was my first & just stuck with it. However increasing IpCamViewer often does not stream that well, losses connection with some camera's. Is perfect with the majority but always a few that...
  2. bignose3

    Center of object - not edge - triggers zone crossing

    HI, I know this thread was started a long time ago but recently re-visited. I had BI for years & always assumed it was leading edge but like iL-Pres I want it the ALPR so timing is essential My problem is (& good for reading plates) is my camera is almost face on, so it seems to struggle to get...
  3. bignose3

    Can you use testing & tuning on a clip from Camera A, on Camera B

    I record 2 separate streams from the same camera (They are the same camera but call A & B as they have two separate configs is BI, NOT Main & Sub Stream) It would be very helpful for this and other situations & in the past if a clip from elsewhere or different camera could be played through a...
  4. bignose3

    Too Many Users, User Limit - host.docker.internal listed connections

    I have Users set to 99, shortened clear time etc. etc. More as an indicator using UI13 from another PC on local LAN sometimes won't allow log on with user limit message. My main problem is I have python script, on the same server PC that is triggered on movement, TRY's to get data from the...
  5. bignose3

    Security - is it OK for the connections to show multiple unknown ip's as long as 0.00 time in sessions

    Thanks for the info Rather than getting just a lecture I would have hoped someone could have advised on the question I asked "They all have 0:00:00 as session & 0 frames. If they had got through, would it show session time?" I would have liked to know if someone had access to the BI videos...
  6. bignose3

    Security - is it OK for the connections to show multiple unknown ip's as long as 0.00 time in sessions

    Hi, Only just noticed that in connections that there are some unknown www & WAN IP's. e.g. hat.census.shodan.io teliacarrier-cust.com Settings : I have 20 logins, usual ban after 5 attempts, release after 1 hour. Have pretty good PW. They all have 0:00:00 as session & 0 frames. If they had got...
  7. bignose3

    Night Settings for LPR - Dahua Z12E

    OK, thanks for fast response, I know persisting to try & do both is foolish, I was so very close & in fact did work really well when the car was under 5pm an 10 feet from the gate but over the last 20 feet cars could be a quite different speeds and stop either 5 to 15 feet away & those stopping...
  8. bignose3

    Night Settings for LPR - Dahua Z12E

    Never seen those POE passive splitter before so that will be a good option, thanks. Now struggling to get the LPR image but of course first of many settings. Lot worse than my original (1st post) default settings with colour. I had not changed gain or brightness so perhaps that's where to start...
  9. bignose3

    Night Settings for LPR - Dahua Z12E

    Many thanks to all of you, going to try Manual 1/125 or 1/250, DNR 35 & keep colour for the moment. Trying to avoid 2 camera's mainly because only have 1 cable, 50m from house & JUST managed to get 1 fed down conduit. Do have power but prefer not to box more power socket & switch as will look...
  10. bignose3

    Night Settings for LPR - Dahua Z12E

    Hi, Thanks for your very fast response. DNR was 50, Should I try grade 30 ? Was auto, shall I try shutter priority first as quite well lit, I know someone above said manual but they seemed to be for almost dark B/W scenes and wonder if a good compromise for a half decent normal (non-LPR)...
  11. bignose3

    Night Settings for LPR - Dahua Z12E

    Hi, I know an old thread but as such knowledge shown above I thought would ask here, ref. LPR Just got a lesser Dahua DH-IPC-HFW2531S-S-S2. Cheapo generic almost worked so did not think had to go higher up the cost. Excellent daylight & just about working night time but yet to fiddle with...
  12. bignose3

    FPS lower than expected on just BI

    Have a SV3C camera 5mp but have reduced. BI reports 12.50 fps VLC & onvif reports 25+FPS as per camera setting viewing via VLC also shows smooth video so must be close to 25fps viewing through BI direct is jittery so assume is the 12.5 fps. lowered camera source to 0.4 mp & still 12.5 fps...
  13. bignose3

    &ALERT_PATH filename is not the same as the actual Alert folder .jpg

    Hi, SOLVED or way round. cmd CLIP JSON does have this information, the file name so can use that. below is how it works. Trying to reference the .jpg alert image in python. I save the &ALERT_PATH to a text file (also the same if I send to MQTT) The text file or MQTT payload is...
  14. bignose3

    Can you test a clip as if it was actually happening, motion & deepstack together for full alert etc.

    HI, I want to really test a clip, using the playback & analyse with motion AND deep stack. I would like to play a clip or video as if it were now and ideally create a new clip & specifically the alert image that is created & the subsequent alert actions. I know all the thing can be done...
  15. bignose3

    Change detection zone/trigger point for better car detection at night or if moving really fast

    Hi, Camera has to be at a bit offset an angle for my best mounting position, fixed camera. I use to open an electric gate. Deepstack to get LPR & avoid sending non car images & Platerecognizer really good at getting plates even at an angle. Free as under easy under 2500 pm. Works 99% day time...
Top