New camera not accepting NVR password

H

hugoti

n3wb
May 9, 2017
11
3
Australia
OK I got bought a new DS-2CD2347G2-LU turrent camera for my property. I already have the Hikvision NVR DS-7616N1-I2 and a number of older turrent cameras. The new camera was plugged into the NVR and in default plug and play mode, the camera connects and I can see the images. However I want to play around with some of the advanced settings so I tried to login into the camera direct. I got the IP address of the camera (via SADP) and got to login page. However the weird thing is that the camera web page will not accept my NVR admin password nor default 12345 password. So what password should it be? I can access all the other turrents fine but not this one for some reason. If it helps I can see on SADP it's using firmware v5.5.111

Is there another default password I should be using or should I reset the password via the SADP/Export function? Seems weird as this is a brand new camera.
 
Found on the NVR it has Default IP Camera Management set to a password. I can't recall what it was but the ones I know don't work. I have since retyped a new password and eventually was able to login, so I assume the NVR eventually override it when I applied a new default ip camera password. So all good now.
 
Last edited:
  • Like
Reactions: looney2ns and alastairstevenson
hugoti said:
Found on the NVR it has Default IP Camera Management set to a password. I can't recall what it was but the ones I know don't work. I have since retyped a new password and eventually was able to login, so I assume the NVR eventually override it when I applied a new default ip camera password. So all good now.
Click to expand...
That's good.
Interesting that the NVR must have used the unknown camera-specific password to then apply the new password.
Did you check if it had also changed the password for the other cameras?
 
Good to hear . That NVR also has show ip camera password . you can just the box and enter the nvr password and it will show all ip camera passwords. For future reference.
 
tone308 said:
Good to hear . That NVR also has show ip camera password . you can just the box and enter the nvr password and it will show all ip camera passwords. For future reference.
Click to expand...

Thanks Tone308. I recall this when I had the older version of the NVR. However I now have Hikvision NVR 4.0. It looks like they've removed this option unless it's moved somewhere else? Do you know if the Hikvision NVR v4.0 offers the show camera password option?
 
You must log in or register to reply here.
Top Bottom