which poe for ds-2cd2343g0-i ?

ste92

Getting the hang of it
Oct 6, 2015
133
6
hi a question, i have to install this camera without using nvr i use a 128 gb micro sd.
which Poe injector should I use?
is everyone okay?
I have to do a few meters, maximum 20 meters ..
Thank you!
 
ok i found these guys, which one would you choose:

- POE-I100GH
- TL-POE150S
- XR-48005
- TL-PoE10R
- TRENDnet TPE-104GS
- 10Gtek [2 Pack] Active Poe Splitter Adattatore, 48V to 12V
- ANVISION Active Gigabit PoE Splitter

reading the camera data: 12 VDC, 0.5A, max. 6W
PoE (802.3af, 37V to 57V), 0.2A to 0.1A, max. 7.5W
I don't know if I have to use a poe that goes from 37V to 57V or is a 12v ok too?
I am not able to choose it ...
 
I can't speak to the reliability of all the ones you listed above other than the Tenda and the TP-Link (TL-POE150S). Either one of those I'd recommend.
 
The power requirements for your camera are:
upload_2019-4-29_22-34-7.png

Any PoE injector compatible with the IEEE802.3af Standard will not damage your camera. Both of the above meet that standard.
Keep the transmission range less than 100M.
 
  • Like
Reactions: ste92
ok i ordered poe Tenda. should I buy an SD memory card, any 128 GB memory?
 
Any Micro SD/SDHC/SDXC card up to 128GB should be fine. It's worth checking your camera is not a grey market import first. Check the serial number doesn't have CCCH in it.
 
I don't understand, what do you mean as a gray market? and what is the CCCH?
I bought it from China, but I updated it with official hikvision firmware and everything went well ..