So I purchased a NewEgg deal that they had on LaView camera/NVR. Unfortunatly at some point during the remodel the cameras walked, thus I'm left with a LaView NVR. From all my research they're just dumbed down Hikvision. My NVR is LV-N9808C8E.
With that I purchased a few Hikvision cameras, specifically I have two DS-2CD2335-I. I went through the setup of the NVR. I got the HD installed and formatted. I also got it assigned an IP, and I'm able to login to it via my computer. The issue however is the cameras.
I've downloaded the SADP program via the disk included with the camera. It locates the NVR, but no cameras. I've attempted to add a camera via the NVR by inputting the default IP listed in the manual of 192.168.1.64 and that doesn't work.
Where am I screwing up here folks? I've spent hours tinkering and I've gotten nowhere.
With that I purchased a few Hikvision cameras, specifically I have two DS-2CD2335-I. I went through the setup of the NVR. I got the HD installed and formatted. I also got it assigned an IP, and I'm able to login to it via my computer. The issue however is the cameras.
I've downloaded the SADP program via the disk included with the camera. It locates the NVR, but no cameras. I've attempted to add a camera via the NVR by inputting the default IP listed in the manual of 192.168.1.64 and that doesn't work.
Where am I screwing up here folks? I've spent hours tinkering and I've gotten nowhere.