My new Dahua SD50430U-HNI PTZ cam was not communicating with our Dahua 5416-16P-4Ks2 NVR on many settings so I had to access it with a laptop.
NVR 192.168.1.108
POE 10.1.1.1
PTZ 10.1.1.68
Laptop 10.1.1.10
Trying to experiment and fix this issue in the camera Web UI I incorrectly set the filter for trusted sites 10.1.1.1 and 192.168.1.108.
Then after hitting save I realized......ooops My laptop 10.1.1.10 couldn't access the cam any more.
Since the NVR isn't communicating reliably I can't reset this with it or another laptop with 192.168.1.xxx
Is there a config file stored on the 10.1.1.10 laptop I can erase maybe.....??
NVR 192.168.1.108
POE 10.1.1.1
PTZ 10.1.1.68
Laptop 10.1.1.10
Trying to experiment and fix this issue in the camera Web UI I incorrectly set the filter for trusted sites 10.1.1.1 and 192.168.1.108.
Then after hitting save I realized......ooops My laptop 10.1.1.10 couldn't access the cam any more.
Since the NVR isn't communicating reliably I can't reset this with it or another laptop with 192.168.1.xxx
Is there a config file stored on the 10.1.1.10 laptop I can erase maybe.....??