suzukifd
n3wb
- Joined
- Mar 6, 2018
- Messages
- 27
- Reaction score
- 1
I’ve never experimented with this, but if you are using an iPhone, check out “iOS App Deeplinking” in the Help PDFInstead of bringing up UI3 is there any way to have links that open in the app? Example I have an onif notification for when the doorbell rings and would like a push to my phone and when I click on the push it will open to the camera not the alert. Is that possible?
That looks normal.I set it as a service under my user and it appears to work. I seem to be getting a popup which I take is normal
Just checked the help PDF, chapter 'Alerts and Actions', section 'Timecodes and other Macros'...Is there a macro to get the LAN IP address instead of the WAN address? I use tailscale to connect to my server and I can use the local addressess.
&LAN
, it works in my testing.Thanks &LAN actually works. I did check the manual and only found &WAN.[
Just checked the help PDF, chapter 'Alerts and Actions', section 'Timecodes and other Macros'...
Perhaps I'm overlooking it, but I don’t see it listed. Try macro&LAN
, it works in my testing.
Good.Thanks &LAN actually works. I did check the manual and only found &WAN.
I haven't found a way. But I made two macros in the main settings using %8 and %9. Those two contain everything I need to use in the alert. So if I ever need to change the lan IP, there's only one place I need to do it. I had to use two because it was too long to have in one.Thanks &LAN actually works. I did check the manual and only found &WAN.
From the curl Action, please check your 'Parameters' field and confirm the Attachment value accurately reflects your current Alerts folder path.Right at the end of the October, my notifications being process dropped markedly, and all but stopped yesterday. The traffic at my gate has certainly not decreased, so I don't know what parm is missing or what update may have caused issues.
All was humming along nicely until now. And it's been so long since I set all this up (per the first post) that I don't recall how to properly troubleshoot. I know for certain though, that the triggers (IR sensor at my gate which has Home Assistant push http syntax to BI to trigger the camera) BI just fine. The camera triggers, but Pushover is doesn't know about it.
View attachment 176794
https://api.pushover.net/1/messages.json -s --form-string "token=CENSORED" --form-string "user=CENSORED" --form-string "message=<b>&CAM</b> &MEMO <a href='http://CENSORED/alerts/&ALERT_DB?fulljpeg'>Hi-Res</a> <a href='http://CENSORED/ui3.htm?rec=&ALERT_DB'>UI3</a>" --form-string "html=1" --form-string "device=motorolaedge" --form-string "sound=tugboat" -F "attachment=@E:\BINAS\BIStorageHere\Alerts\a248\&ALERT_PATH"
From the curl Action, please check your 'Parameters' field and confirm the Attachment value accurately reflects your current Alerts folder path.
If everything looks OK, then try my 'msg.exe trick' to confirm the macros are resolving correctly.
Send Pushover notifications with pictures and hyperlinks
I've figured out how to send Pushover notifications with pictures and hyperlinks from Blue Iris Actions without using external scripts. This approach uses curl and the Pushover API, and provides functionality similar to that recently described for Telegram . EDIT (5/16/2022) - For those who...ipcamtalk.com
Very good. Are you using AI on this camera, and using it to confirm alerts? If so, perhaps something has changed?The path is correct - using file explorer I walked to the path and confirmed all my alert images are there.
As for the testing, I am triggering a test by right-clicking in the console on the camera and clicking "trigger now". Alternatively, from UI3 on a client PC, I do the same thing on the web interface. Both result in an immediate notification (sans thumbnail when -F is not in the action set).
Attempting to set up mesg trick now.
https://api.pushover.net/1/messages.json -s --form-string "token=REDACTED" --form-string "user=REDACTED" --form-string "message=<b>&CAM</b> &MEMO <a href='http://REDACTED/alerts/&ALERT_DB?fulljpeg'>Hi-Res</a> <a href='http://REDACTED/ui3.htm?rec=&ALERT_DB'>UI3</a>" --form-string "html=1" --form-string "device=motorolaedge" --form-string "sound=tugboat" -F "attachment=@E:\BINAS\BIStorageHere\Alerts\a248\&ALERT_PATH"
Just noticed the &ALERT_DB macro is resolving to '@-1'.
I saw that recently when my database was corrupted by v5.8.0.9. Maybe time for a DB/Repair or DB/Regenerate?
Curious if you are using Artificial Intelligence on your Trigger qualifiers? You may be getting a triggered event but running it through AI before the alert is sent. And if this is the case then if AI doesn't meet the conditions required to send the PushOver alert you'll never see it. The best way to check this is look at your alerts. If "nothing found" then no PushOver alert if this is how you have it configured. See below....top one, no PushOver alert....bottom one, yes.Right at the end of the October, my notifications being process dropped markedly, and all but stopped yesterday. The traffic at my gate has certainly not decreased, so I don't know what parm is missing or what update may have caused issues.
All was humming along nicely until now. And it's been so long since I set all this up (per the first post) that I don't recall how to properly troubleshoot. I know for certain though, that the triggers (IR sensor at my gate which has Home Assistant push http syntax to BI to trigger the camera) BI just fine. The camera triggers, but Pushover is doesn't know about it.