SD59225U-HNI startup motor skipping

Putimir

n3wb
Joined
Nov 9, 2016
Messages
20
Reaction score
7
Ok, I found locally produced (would you know it heh) stepdown transformer, I took the 50W version and so far so good, the "little piggie" is back online! Thanks again guys!

Oh one more thing: the transformer has only one bracket/connector for ground/earth wire; should I connect the ground wires from both, the supply side of the coil AND from the camera?

2605433_vgradni_transformator_eltraf_varnostni_locilni_50va_400v_24v_50va_400_24v_ei_p_5023024...jpg
 
Last edited:

handinpalm

Getting comfortable
Joined
Sep 21, 2016
Messages
679
Reaction score
1,432
Location
Tampa Bay FL
Yes, you can tie the gnd from your house power and from the camera at the xformer. You do want to add a fuse on the input line in case of a catastrophic failure.
 
Top