save camera setup

[superpatpat]

Hi everyone, a quick question this morning for the professionals, is there a way to save the set up of a camera if I reset the camera in trouble, because for the past few days I have had a lot of human alarms? but in reality he has no one in my yard that's why I want to try to save my data from my camera thank you again

 

[SpacemanSpiff]

I read the manual for my Dahua 5442, and it provides the directions for importing and exporting the camera system configuration file via the web interface of the camera.

 

[superpatpat]

yes thank you I just found, I did a reset and import my configuration, but it still detects human movement for nothing

 

[WimNL]

I am not An expert, but if you put back your config after a reset you still will be working with settings that don't work correct for you....
Just reset and try to set it up without previous settings.
And as always: read and test.... That reading is something I always do after the testing

 

[superpatpat]

yes you are right I will do it over again thank you very much

 

[IAmATeaf]

Are you sure motion detection hasn't been enabled on the cam which might be what is triggering the cam?

 

[wittaj]

You have a setting somewhere configured wrong or a problematic field of view.

Post screenshots of the Motion Detection, Smart Motion Detection, Smart Plan, Global config, and IVS pages.

 

[superpatpat]

thank you all I found the problem, I have a big tree in the back of the yard, and yet before the camera did not detect the moving branches, and today the camera took the branch movements like humans

 

[SpacemanSpiff]

 

[superpatpat]

I think most of you don't activate motion detection and just use IVS, I find that at night it doesn't always detect movement, maybe I haven't configured it properly, thank you again for your advice. I love the forum