So it worked with BI for a while and then BI lost it? Sounds like a wifi issue. You are sure its still powered up and still on the same IP address?I installed the DB1C yesterday and everything seemed to be fine....Now I can see the doorbell through the EZVIZ app and everything appears to be working but the blue iris lost its feed. I changed nothing. It dropped that feed overnight while I was away. I am using a eero mesh router and i reserved the ip address and it has not changed....I can't get the main and substreams right I think....I see several different variation of them in just this thread....
What is working for yall? Did it change with firmware upgrades?
I am using the password that is on the user manual above the scan code thing......
So it worked with BI for a while and then BI lost it? Sounds like a wifi issue. You are sure its still powered up and still on the same IP address?
Wifi cameras outside a home are going to be extremely susceptible to poor wifi coverage since now the signals have to go through exterior walls (assuming your AP is mounted inside of course).
Thank you so much! I will do that. No rotate feature on Google Home and Google Hub.Yes, a microphone cover for the camera - surprised someone doesn't make that! On one of my cameras I took a piece of toe foam you can buy for like a blister or something and just cut a piece off and it works perfectly. Much better than the electronic noise suppression did!
I do not have Google Hub, so hopefully someone chimes in what a solution, but I would think there would be a rotate feature somewhere.
Do you mean from a doorbell press? Installed one yesterday at my daughters house and had no problem with conversing after doorbell press, a bit of a delay but worked. This is how I noticed the new software, the same but different.Been running 5.0.0. for a while via Testflight, beta testing, went back to original after trouble with the app not receiving incoming call, hopefully they have resolved this in 5.0.1.