Hi all,
I have a 7632NI-I2 NVR and connected the AcuSense cam 2386G2 to it.
As this is no AcuSense NVR, I understand that I have to configure all the motion detection on the camera itself as only there the human/vehicle classification is available.
But no matter what I configure on the cam, it seems like the NVR does not get triggered to record any event or motion detection from the cam.
I can see that the motion detection on the cam itself is working as I set to activate the cams strobelight when it detects something. Thats working, but no record is triggered at the NVR.
I can use continuous recording on the NVR, so at least it can record something, but that's not what I want.
Any suggestions?
Thanks
I have a 7632NI-I2 NVR and connected the AcuSense cam 2386G2 to it.
As this is no AcuSense NVR, I understand that I have to configure all the motion detection on the camera itself as only there the human/vehicle classification is available.
But no matter what I configure on the cam, it seems like the NVR does not get triggered to record any event or motion detection from the cam.
I can see that the motion detection on the cam itself is working as I set to activate the cams strobelight when it detects something. Thats working, but no record is triggered at the NVR.
I can use continuous recording on the NVR, so at least it can record something, but that's not what I want.
Any suggestions?
Thanks