PTZ5A4K-25x Stopped working after being in web interface. How to reconnect

[JPmedia]

This and many of the larger PTZ cameras can use up to 70 watts of power when everything is in motion. You have to remember that there are 3 motors that run when auto tracking is used, which can consume up to 40 watts by themselves, not to mention the power used by the camera portion itself and internal fan. If you add IR lighting, easily another 3 to 10 watts depending on configuration of the PTZ

 

[EMPIRETECANDY]

Normally this POE Injector is the best for powering these ptzs.

https://www.amazon.com/Loryta-PFT1200-Transmission-Multilevel-Providing/dp/B08LKN65SY/ref=sr_1_1?dib=eyJ2IjoiMSJ9.wuBBmpUoX-96neGlj0wPog.gG3FxpFXjnifDw9JvCpgQCv_S1Y5k9B1FZBvgitRX3A&dib_tag=se&keywords=PFT1200&m=A329YQ83EBQGJF&qid=1753600239&s=merchant-items&sr=1-1

 

[bigredfish]

^^^^^
This

 

[Chokolinho]

Even the ZHE Bullet takes 10-14w in IR at night.

 

[JHW]

wittaj was right on. Thanks also to everyone else for comments. I'm going to have pick up those POE injectors from Andy. I put it on the 24v supply last night and reenabled BI. This morning I see that it is auto tracking very well and I've had zero lost signals. Hopefully I haven't stressed out any components.