Please HELP!!! POE IP Camera connect to NVR

J

jake yost

n3wb
Jul 26, 2018
15
0
Chattanooga, TN
I am very ignorant about this and really need help!

I have a Swann NVR 7400 with 8 ports for cameras. I am currently running 4 outside cameras on the system. I bought 4 mini POE IP cameras to put inside the house and cannot get the Swann NVR to recognize them. Any suggestions would be greatly greatly appreciated.

Thanks,

Jake
 
jake yost said:
I am very ignorant about this and really need help!

I have a Swann NVR 7400 with 8 ports for cameras. I am currently running 4 outside cameras on the system. I bought 4 mini POE IP cameras to put inside the house and cannot get the Swann NVR to recognize them. Any suggestions would be greatly greatly appreciated.

Thanks,

Jake
Click to expand...
Are the cameras models a secret?
 
  • Like
Reactions: mat200
Sorry, I did not mean to leave that out. Honestly, I bought them on ebay and they look like this.
s-l225.webp
 
jake yost said:
So, they don't say the brand or model
Click to expand...
there is a high probability that you cannot add them. Swann uses different manufactures on various models. Some dont support onvif or rtsp streaming.
post images of the options to add a camera.
 
  • Like
Reactions: mat200
This is what the screen looks like where I have added the cameras in the past that came with the system.
 

Attachments

  • unnamed-1.jpg
    unnamed-1.jpg
    11.7 KB · Views: 24
  • unnamed.jpg
    unnamed.jpg
    11.6 KB · Views: 20
jake yost said:
So, do you think it is possible to get this to work, or no?
Click to expand...

Hi Jake,

Do the cameras have an ONVIF setting?

Is there an rtsp stream available?
 
jake yost said:
From what I understand ONVIF is a protocol (which i dont know what that means). THe protocol on the NVR screen for the cameras is set on automatic.
Click to expand...

Hi Jake,

I am not asking about the NVR for a good reason, I am asking about the cameras:

"Hi Jake,

Do the cameras have an ONVIF setting?

Is there an rtsp stream available?"
 
mat200 said:
Hi Jake,

I am not asking about the NVR for a good reason, I am asking about the cameras:

"Hi Jake,

Do the cameras have an ONVIF setting?

Is there an rtsp stream available?"
Click to expand...
Features:
※1080P HD resolution,clear and fine images;
※ Support 2D/3D noise reduction,digital wide dynamic;
※ Support for mobile video surveillance(iOS,android);
※ Support Web, CMS, platform management software MYEYE,Provide SDK ;
※ Advanced H.265+/H.265X video compression,Super low rate,high definition quality of image;
※ Professional anti-lightning,conform to GB/T17626.5 and IEC61000-4-5。.
※ 3MP Dual Filter IR-CUT Build-in.
※ Support ONVIF;access third party;
※ Support various mobile monitoring(iPhone,Android);
※ Support motion detection (needs private protocol when using NVR).
※ Provide web、CMS、center platform management software MYEYE,provide SDK development.
※ Support cloud technology,easy to achieve network penetration,fro in-line and alarm information pushed.
※ It just can be used indoor.
 
jake yost said:
Support ONVIF;access third party;
Click to expand...
You need to know the 'ONVIF port', this is usually one of the parameters in the channel configuration of the NVR for an ONVIF protocol connected camera.

The ONVIF port can be inspected using ONVIF Device Manager (sourceforge.net).
The PC needs to have an IP address in the same range as the camera you want to query.
Give ODM a valid logon ID/password (top left of its window) and it will find ONVIF devices on the same LAN as the PC automatically.
The ONVIF port can be seen in the URL at the bottom of the 'Identification' page.
 
  • Like
Reactions: mat200
You must log in or register to reply here.
Top Bottom