Password reset/factory reset for Dahua NVR4204-P-ADT-2

[GoCougs]

Hello, new to this forum. - I recently moved into a home with an ADT security system. Part of this is an ADT NVR4204-P-ADT-2 Dahua hooked up to 4x exterior cameras. I do not want to use ADT but would like to reuse this NVR/CAM setup if possible. I do not have the admin password (prior owners do not either), there does not seem to be a reset button on the motherboard. I have tried "admin", "88888", "password", not working. Anyone have a solution to this?

 

[Pharmer]

I have absolutely no answer for you but GO COUGS!

 

[stl1612]

Hello, new to this forum. - I recently moved into a home with an ADT security system. Part of this is an ADT NVR4204-P-ADT-2 Dahua hooked up to 4x exterior cameras. I do not want to use ADT but would like to reuse this NVR/CAM setup if possible. I do not have the admin password (prior owners do not either), there does not seem to be a reset button on the motherboard. I have tried "admin", "88888", "password", not working. Anyone have a solution to this?

Curious if you ever figured this out? I'm in the exact same situation.

 

[GoCougs]

Curious if you ever figured this out? I'm in the exact same situation.

Nope. Gave up and purchased a new H.View NVR. I was able to reset the ADT/Dahua POE cameras and it works great.

 

[EMPIRETECANDY]

Curious if you ever figured this out? I'm in the exact same situation.

The only way is to do serial port update if you even no register email to find it back, but this is not easy for end users.

 

[stl1612]

Nope. Gave up and purchased a new H.View NVR. I was able to reset the ADT/Dahua POE cameras and it works great.

Thanks for the response. I'll give that a try.